Specifications

63
 SPECIFICATIONS
150, 175, 200 60° V6 Models
Displacement
158.2 cu. in. (2592 cc)
Engine Type
60° V, 6 Cylinder, Two-Cycle, E-TEC
Full Throttle Operating
Range
150 HP – 4850 to 5850 RPM
175 HP – 4850 to 5850 RPM
200 HP – 4850 to 5850 RPM
Power
(1)
150 HP – 150 HP (110 kw) @ 5350 RPM
175 HP – 175 HP (129 kw) @ 5350 RPM
200 HP – 200 HP (147 kw) @ 5350 RPM
Idle RPM in Neutral
(2)
500 ± 50
Ignition Timing
(2)
Controlled by the outboard’s EMM
Emission Control System:
per SAE J1930
(2)
ECM, E-TEC (Engine Control Module, E-TEC)
Fuel Requirements
(2)
87 Pump Posted AKI (90 RON) – Refer to Fuel Requirements
on page 20
Oil – Lubricant
Evinrude/Johnson XD100 oil or TC-W3 NMMA-certified oil
– Refer to
Oil Requirements on page 18
Warning Signals
Controlled by the outboard’s EMM
Battery, Minimum
(3)(4)
675 CCA (845 MCA) 12 volt or
800 CCA (1000 MCA) 12 volt below 32°F (0°C)
Spark Plug
(2)
Refer to ECI Label
Fuses
P/N 967545 – Refer to
Fuse on page 47
Fuel Filter
P/N 502906
Battery Charging
50-Amp, Fully Regulated, Dual Isolated
Gearcase – Lubricant
(5)
– Capacity
Evinrude/Johnson HPF XR Gearcase Lubricant
DPL, DSL Models (O) – 33.1 fl. oz. (980 ml)
DHL, HSL, DPX, DBX, DMX Models (M2) – 38.9 fl. oz. (1150 ml)
DCX Models (M2-CR) – 35.8 fl. oz. (1060 ml)
Power Trim/Tilt – Fluid
– Capacity
Evinrude/Johnson Power Trim/Tilt and Power Steering Fluid
21 fl. oz. (622 ml)
Propeller
Refer to
Propeller Selection on page 59
Weight
L Models – 418 lbs. (190 kg)
X Models – 433 lbs. (196 kg)
Sound at Driver’s Ear
(LpA) ICOMIA 39.94
79.0 dB(A)
Transom Height
L Models – 19 1/2 to 20 in. (495 to 508 mm)
X Models – 24 1/2 to 25 in. (622 to 635 mm)
(1) Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.
(2) Emission Control Information.
(3) Use a 800 CCA (1000 MCA) battery when operating in temperatures below 32°F (0°C).
(4) Under extraordinary electrical load or environmental conditions, use a 107 amp-hour minimum battery
(generally available in group 29 size).
(5) Use Evinrude/Johnson HPF Pro Gearcase Lubricant for high performance outboards and commercial
applications. Evinrude/Johnson HPF Pro Gearcase Lubricant delivers exceptional durability and reliability
and promotes long gearcase life in marine use.