Specifications

65
 SPECIFICATIONS
250, 300 (3.4 Liter) Models
Displacement 210 cu. in. (3441 cc)
Engine Type 90° V, 6 Cylinder, Two-Cycle, E-TEC
Full Throttle Operating Range
250 HP – 4500 to 6000 RPM
300 HP – 5000 to 6000 RPM
Power
(1)
250 HP – 250 HP (184 kw) @ 5250 RPM
300 HP – 300 HP (221 kw) @ 5500 RPM
Idle RPM in Neutral
(2)
500 ± 50
Ignition Timing
(2)
Controlled by the outboard’s EMM
Emission Control System:
per SAE J1930
(2)
ECM, E-TEC (Engine Control Module, E-TEC)
Fuel Requirements
(2)
87 Pump Posted AKI (90 RON) – Refer to Fuel Requirements on
page 20
Oil – Lubricant Evinrude/Johnson XD100 oil or TC-W3 NMMA-certified oil
– Refer to
Oil Requirements on page 18
Warning Signals Controlled by the outboard’s EMM
Battery, Minimum
(3)(4)
675 CCA (845 MCA) 12 volt or
800 CCA (1000 MCA) 12 volt below 32°F (0°C)
Spark Plug
(2)
Refer to ECI Label
Fuses P/N 967545 – Refer to
Fuse on page 47
Fuel Filter P/N 502906
Battery Charging 50-Amp, Fully Regulated, Dual Isolated
Gearcase – Lubricant
(5)
– Capacity
Evinrude/Johnson HPF XR Gearcase Lubricant
M2 Gearcase (Standard Rotation) – 38.9 fl. oz. (1150 ml)
M2 Gearcase (Counter Rotation) – 41 fl. oz. (1220 ml)
Power Trim/Tilt – Fluid
– Capacity
Evinrude/Johnson Power Trim/Tilt and Power Steering Fluid
21 fl. oz. (622 ml)
Propeller Refer to
Propeller Selection on page 59
Weight
L Models (.54 ratio) – 507 lbs. (230 kg)
X Models (.54 ratio) – 528 lbs. (239 kg)
Z Models (.54 ratio) – 534 lbs. (242 kg)
Sound at Driver’s Ear
(LpA) ICOMIA 39.94
84.0 dB(A)
Transom Height
L Models – 19 1/2 to 20 in. (495 to 508 mm)
X Models – 24 1/2 to 25 in. (622 to 635 mm)
Z Models – 29 1/2 to 30 in. (749 to 762 mm)
(1) Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.
(2) Emission Control Information.
(3) Use a 800 CCA (1000 MCA) battery when operating in temperatures below 32°F (0°C).
(4) Under extraordinary electrical load or environmental conditions, use a 107 amp-hour minimum battery
(generally available in group 29 size).
(5) Use Evinrude/Johnson HPF Pro Gearcase Lubricant for high performance outboards and commercial
applications. Evinrude/Johnson HPF Pro Gearcase Lubricant delivers exceptional durability and reliability
and promotes long gearcase life in marine use.