Use Instructions
Table Of Contents
- WARRANTY AND AFTER-SALES
- INTENDED USE
- SAFETY PRESCRIPTIONS
- DANGER OF BURNS
- 1. DESCRIPTION OF THE APPLIANCE
- 2. TECHNICAL INFORMATIONS
- 4. BEFORE FIRST USE
- 5. CLEANING
- 6. USER INTERFACE DESCRIPTION
- 7. EXPLANATION OF THE INTERFACE
- 8. SYMBOLS EXPLANATION
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
•
Install the glass brewing chamber (A11) (picture 13)
•
Make sure the glass brewing chamber is installed below the edge (as shown in
picture 14).
•
Put your tea in the tea sieve and close it (picture 15) *Caution, always install the
sieve according to the guidelines to ensure best results.
•
Place the tea sieve (A9) in the machine. (When using tea leaves always close the tea
sieve lid (A10), if using a teabag, the sieve can be left open.)
•
Make sure the tea sieve is well installed according to picture no 17
•
Close the machine lid (A8) (picture 18)
3.1 FAST INSTRUCTION – Brew tea
1.
Place the cup on the drip tray (picture 19)
2.
Press the encoder (picture 20) to start your tea (see section 7: Explanation of the
interface)
3.
Your machine will notify acoustically when your tea is ready
4.
If you face any errors, check the FAQ on the website bru-tea.com or contact or
contact BRU customer service
4. BEFORE FIRST USE
1.
Read all the instructions and warnings.
2.
Remove all packaging's materials and make sure all items are in good conditions.
3.
Remove Brewing Glass chamber and rinse with water, then dry thoroughly before
returning to appliance.