Use Instructions
Table Of Contents
- WARRANTY AND AFTER-SALES
- INTENDED USE
- SAFETY PRESCRIPTIONS
- DANGER OF BURNS
- 1. DESCRIPTION OF THE APPLIANCE
- 2. TECHNICAL INFORMATIONS
- 4. BEFORE FIRST USE
- 5. CLEANING
- 6. USER INTERFACE DESCRIPTION
- 7. EXPLANATION OF THE INTERFACE
- 8. SYMBOLS EXPLANATION
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
5. CLEANING
Cleaning the machine
1.
The following parts of the machine must be cleaned regularly:
-
Drip tray (A5)
-
Glass chamber (A11)
-
Tea Sieve (A9)
-
Silicone
Nozzle (A6)
-
Important, do not use solvents, abrasive detergents or alcohol to clean the tea
maker.
Important!
1.
Do not use solvents, abrasive detergents or alcohol to clean the tea maker.
2.
Do not use metal objects to remove encrustations or tea leaves deposits as they
could scratch the metal, glass or plastic surfaces.
3.
If the appliance is not used for more that one week, before using it again, we
strongly recommend you perform a rinse cycle as describer in section first use.
Danger!
1.
Never immerse the tea maker in water. It is an electrical device.
2.
Before cleaning the outside of the appliance, turn it off, unplug from the mains
socket and allow to cool.
Cleaning the drip tray
1.
Remove the drip tray, remove the drip tray plate, empty the water and clean the
drip tray with a cloth, then reassemble the drip tray.
2.
Put the drip tray back in place.