Warranty Guide
3
Residential
Finish
Warranty -
in years (1)
Commercial
Finish
Warranty -
in years (2)
Wood
Wayer
Layer
Warranty -
in years (3)
3 Times
Sanding
Warranty
(4)
1 Time
Sanding
Warranty
(4)
Adhesive
Bond
Warranty
(5)
Subfloor
Moisture
Protection
Warranty
(6)
Suitable
for
Radiant-
Heated
Subfloors
15-YEAR
Engineered
Beaumont Plank
15
X
X
X
X
Springdale Plank
15
X
X
X
X
Summerside Strip
15
X
X
X
X
Solid
Frisco
15
X
Laurel Strip
15
X
10-YEAR
Urethane Parquet
10
5-YEAR
Solid
Addison
5
X
Footnotes
(1)
We warrant to you (the original purchaser) that for the period indicated, the finish on the covered product
will not wear through, and that the finish will not separate from the wood flooring under normal household
use when maintained in accordance with our recommended maintenance guidelines. Mechanical,
chemical, or other modification of the finish, such as sanding or abrading, voids this warranty. Some
products may be sold with promotional warranties of a different length than the warranties indicated above.
The length of the promotional warranties takes precedence over the warranties in this “Hardwood Floors
Warranty Guide”. Limited Lifetime Finish Warranty means fifty years in these cases.
(2)
We warrant to you (the original purchaser) that for the period indicated, the finish on the covered product
will not wear through, and that the finish will not separate from the wood flooring under normal commercial
use when maintained in accordance with our recommended maintenance guidelines. Mechanical,
chemical, or other modification of the finish, such as sanding or abrading, voids this warranty.
(3)
We warrant to you (the original purchaser) that for the period indicated, the acrylic-infused wear layer will
not wear through under normal household or commercial use when maintained in accordance with our
recommended maintenance guidelines.
(4)
We warrant to you (the original purchaser) that the covered products may be professionally sanded and
refinished at least 3 times or 1 time as specified by product if proper sanding and refinishing procedures
are followed as specified by the National Wood Flooring Association (www.nwfa.org). Sanding voids (1)
and (2).
(5)
We warrant to you (the original purchaser) that for as long as you own your floor, each of our
recommended adhesives will maintain its bond when properly installed with our covered flooring products
and when maintained in accordance with our recommended maintenance guidelines.
(6)
We warrant that each of the covered engineered hardwood flooring products, when properly installed with
our recommended adhesives according to our installation instructions (including proper subfloor moisture
testing), will not release from the subfloor for as long as you (the original purchaser) own your floor. This
means that prior to installation your subfloor must be inspected to assure your subfloor does not exceed
maximum allowable moisture levels. To ensure your warranty remains effective, keep your proof of pre-
installation moisture test results. If subfloor exceeds maximum allowable moisture levels, the subfloor must
be allowed to dry or Armstrong Pro S-135 VapArrest™ Moisture Remediation System should be used.
Subfloors with known moisture problems are not covered by this warranty. This is a one-time repair and
replacement warranty only.
(6A) Residential Warranty
We warrant that, when the Armstrong Pro S-135 VapArrest Moisture Remediation System is used in
conjunction with our recommended urethane adhesives for Bruce
®
brand engineered hardwood flooring,
the terms of the applicable subfloor moisture warranty for such