User's Manual

V2.0
⚫ Insert to the devices with a standard USB interface. The keyboard is found and installed
automatically.
NOTE: When the battery is low, the low-voltage light will blink to warn the user. The
unit will be automatically turned off if the battery has been depleted.
Auto sleep and wake feature
The keyboard also features an auto sleep and auto wake mode. If there is a long period of
inactivity, the keyboard will automatically go into a sleep mode. During the sleep mode,
the user can wake the unit up by pressing any key. The 2.4 GHz receiver and keyboard’s
RF indicator will continue to flash and will not power down.
Switching off the keyboard after use
After finishing using the keyboard, push the switch to the off position. This turns off the
power of the keyboard. The USB receiver should be plugged out from the PC and then
inserted back in the keyboard so it is being kept safely.
Charging the battery
The device with lithium-ion battery, please use only approved data lines and chargers.
Note: Fully charge the unit before operating for the first time. This device can be used
when charging, but will extend the charging time;
When the battery is low, the low-voltage light will flash to warn the user. The unit will
automatically turn off if the battery has been depleted.
When the state of the dry battery is used, the power charge is not valid.
Appendix