Operator`s manual

©2012 Bruno Independent Living Aids, Inc.® SRE-3000 Operator 09-24-2012
10
OPERATION
The SRE-3000 includes a
“soft-start” feature which
prevents the unit from moving
abruptly the instant the
UP/DOWN switch is pressed.
Press and hold the switch for
a moment to begin the gentle
acceleration of the stairway
elevator to operating speed.
1. Turn the keyswitch to ON.
2. Position yourself in the seat.
3. Fasten the positioning belt.
4. Depress and hold the seat swivel lever.
5. Rotate the seat so that you are at right
angles to the rail (with your back to the
stairway wall).
6. Release the seat swivel lever to secure
the seat in that position.
A safety switch prevents operation of
the SRE-3000 unless the seat is locked
in position at right angles to the rail
(the “riding” position).
7. Lower both armrests completely.
NOTE: If the armrests are not completely
lowered, a safety switch disables the
rocker switch and the stairway elevator
will not operate.
Depressing and holding the
rocker switch will cause the
carriage to move until the
carriage stops automatically at
the upper or lower end of the
stair rail, or until the switch is
released.