Installation guide

Aftermarket LCD Upgrade Manual
44 P/N 400-283-301 Rev A
8 Power Up & Verify Operation
Before applying power, double check all connections. Turn on your scoring chassis, the
breaker on overhead and the power strip. The LCD will display a blue
power light if the LCD has power but has not been turned on. When
powering up, the LCD will display the Qubica logo screen. Once the logo
has turned off, press the <POWER> button on the supplied remote (or on
the front of the monitor). Press the <SOURCE> button on the remote to select the correct
monitor input for your scoring system.
8.1 LCD Screen Adjustments
If your display needs sizing and/or horizontal or vertical adjustment, follow these
instructions. Please note that adjusting the monitor depends on how your monitor
connects to your scoring system. Follow the instructions specific to your setup (S-Video or
RGB).
8.1.1 S-Video
1. Bring a scorer online and make sure your
display shows at least 4 or 5
bowlers in your normal grid
configuration. Go to the Main
Menu by pressing the
<MENU> button on
the remote.
2. Once at the menu above, enter the
numbers <5380> which will bring up this
menu.
3. Scroll down to Setup and press the right
arrow button.