Specifications

1
Foul Detectors
9
Call ZOT at 1-800-525-8116 for more details
Foul Detectors
Foul Light Lamp Vibration
Damper Kit
Retrofit for ZOT Wizard Foul Detectors
#400181 .......................$12.80
Extends The Life Of #90 Lamps: Test
results confirm that this vibration system
greatly reduces early failure rate of lamp
filaments.
Increased Reliability: Results in reduced
time on routine maintenance.
Kit Contains Parts For One Complete Unit:
(E.G., Two lamp fixtures).
Cover Hold Down Kit
#420182
.......................$14.20
Secure Loose Foul Detector Covers: Steel
anchor plate firmly connects to the wood
approach regardless of the condition of the
screw hole.
Easy Installation: Drill recess into wood
approach using
1 1/2" wood bit, then fas-
ten steel anchor to approach using two
wood screws. To finish, secure foul detector
cover with a 3 1
/2" machine screw. All
screws are included in the kit.
Scanner Ball Detect Reflector Kit
For Brunswick AS 80 And AS 90 Scoring
#420089 .......................$30.95
Improved Signal Strength: ZOT’s
simple modification will improve
signal strength 2-1/2 times, yield-
ing improved performance from
marginal bulbs.
Cost Savings: The larger surface
reflector, and special 15° retro-
reflective face, will result in sav-
ings on bulbs and equipment
maintenance.
Reflector Only: #800019
Guard Bracket Only: #640039
Note:
Each kit includes two reflectors.
Rectangular Ball Detect Reflector
For Brunswick AS 80 And AS 90 Scoring With AMF Hide-A-Bumper System
#800041..........................$7.82
Improved 79 Scanner Performance: When
AMF’s Hide-a-Bumper system is installed
under the divider trim and capping, with AS
80 or AS 90 scoring, ZOT’s Rectangular Ball
Detect Reflector will dramatically improve
marginal operating signal levels.
Saves Money: This low cost upgrade not
only yields a better performance, it cuts
down on bulbs, and other related equipment
replacement.
Increased Signal Strength: The special high
output 15° retro-reflective face of this small
reflector, which will fit under your existing cover,
will increase your signal strength by 50%.
Low Cost Modification: Which minimizes
problems with dust, alignment and
marginal bulbs.
Signal Strength Reflector Modification Kit
For Brunswick Astro/2000 Telefoul
#420088 .......................$14.70