Specifications

Mask Light Conversion Kit
#400262
.................$24.95
•
Stop Constant Replacement: of older technology incandescent lamps. # 90,
#94, #624, #1692 and #68 lamps are rated to last 750 hours. LED
Technology will run for 100-thousand hours — that’s a life expectancy
that’s more than 100-times longer
•
Discard Aging and Worn Sockets: remove problem sockets, obsolete worn
contacts and aging wires.
•
Simple Mounting: easy drill & screw LED & Lens system to the front of the
mask unit.
•
Saves Power: The LED Light uses less than
1/10th of the power (current) than the old #90
incandescent lamp.
•
Optional Wire Replacement: easy screw/ wire
connection at the LED PC Board enables you to
connect with a 6” jump-wire, or you can replace
the complete run using your own wire.
68
Mask & Lane Products
12
Mask & Lane Products
Mask Light Bulb Replacement
“Replace incandescent bulbs with LED’s”
#400265 Red LED (12-Volts) for centers with
AMF Pinspotters: $14.45 each
#400261 Red LED (24-V
olts) for centers with
Brunswick Pinsetters: $14.45 each
ZOT has made improvements to the LED replacements for incandescent
light bulbs on Mask units. The new LED’s are RED (when lit), which
yields a “greater degree of brightness” in typical bowling center
lighting.
The Effective Life of the product is 100 times longer than the bulbs they
replace. That’s a life expectancy of 100,000 hours of run time.
Power Saving: LED’s use less than 1/10th of the power used with
incandescent bulbs.
They are easy to install: Simply push and turn, just like the
old bulb.
“Improved”
Increased Brightness Level
1. ZOT Pinsetter Parts, Inc., Warrants Products to be free from defects
in material and workmanship under normal condtions of use and
service. The obligation of ZOT Pinsetter Parts, Inc., Under this
warranty, being limited to making good, at the factory, any part
manufactured by ZOT Pinsetter Parts, Inc., which shall within one
(1) year after delivery to the original purchaser be returned to the
factory of ZOT Pinsetter Parts, Inc., with transportation charges paid.
2.Except as herein above provided, there is no warrant, express, or
implied, and none shall be implied by law, and ZOT Pinsetter Parts,
Inc., expressly denies on the part of any person or entity to incur or
assume, for ZOT Pinsetter Parts, Inc., any other liability in
connection with the sale of any ZOT products.
ZOT Pinsetter Parts, Inc., Warranty
24V
12V