Specifications

Form No. PDS 551B.36.4
COMMERCIAL
SINGLE PACKAGE ROOFTOP
ELECTRIC COOLING UNITS
Bryant has designed these units based on customer needs
and requests to be the most efficient and reliable rooftop units
ever made.
FEATURES/BENEFITS
Most efficient cooling in the industry using scroll
compressors
Full range of electric heat sizes available — exactly the right
size for your needs.
High reliability — non-corrosive condensate pans, pre-
painted cabinets and primed interior panels, and all units are
fully protected by internal safeties
Quietest operation in the industry — all compressors
mounted on independent vibration isolators. Standard belt-
driven evaporator fan motors on all units
Ease of maintenance achieved by standard size filters,
optional direct digital controls, tool-less filter access, simple
compressor access, permanently lubricated belt driven fan
motors, optional disconnect switch, optional 115-v conve-
nience outlet, and optional hinged access panels
Perfect Humidity™ dehumidification package. This factory
installed option improves the dehumidification capability of
the rooftop unit and helps control humidity levels in the condi-
tioned space.
BRYANT MEANS TOP QUALITY AND RELIABILITY —
Each
component utilized in these units is designed and tested for a
minimum of 15 years operation under the harshest conditions.
Every unit is thoroughly run tested at the factory in each oper-
ating mode and evacuated prior to final charging. Every coil is
leak-tested with helium particles. Automated run testing allows
accurate undisputed tests and measurements which are sec-
ond to none in the industry.
Each unit contains a factory printout indicating tested pres-
sures, amperages, dates, and inspectors, providing certifica-
tion of the unit’s status at the time of manufacture.
Units are equipped with valuable safety controls designed to
monitor and protect the unit for life. The standard safeties
include:
low-pressure/loss-of-charge switch
high-pressure switch
freeze-protection thermostat
internal compressor overload
exclusive Cycle-LOC™ circuit board that provides compres-
sor anti-cycling
refrigerant filter drier
The cabinet is constructed of galvanized steel, bonderized and
coated with a prepainted baked enamel finish. The paint finish
is a non-chalking type, and is capable of exceeding Federal
Test Method Standard No. 141 (Method 6061) 500-Hour Salt
Spray Test. In addition, all internal cabinet panel surfaces are
primed, allowing the entire unit to have a longer life and more
attractive appearance.
EASY MAINTENANCE AND INSTALLATION
All Units are Factory Shipped in the Vertical Discharge
Configuration
for fit-up to standard roof curbs. (One acces-
sory curb fits sizes 036-072; another accessory curb fits
sizes 090-150.) The contractor can order and install the roof
curbs early in the construction stage, before decisions on size
requirements have been made.
All Units Feature Roll-Formed Baserail
design with forklift
slots on 3 sides of the unit and rigging holes for easier maneu-
vering and installation. Stretch-wrap packaging protects the
unit during shipment and storage.
Units are Easily Converted
from vertical to horizontal applica-
tions to make retrofit and add-on jobs easier. To convert from
vertical to horizontal discharge, simply relocate 2 panels.
The same basic unit can be used for a variety of applications
and can be quickly modified at the jobsite. Standard high-
performance, belt-driven, evaporator-fan motors enable the
551B036-150 units to operate in most ductwork configurations.
Ductwork Connections are Simplified
by the logical 2 to 1
aspect ratio. On vertical discharge units, ductwork attaches
directly to the roof curb.
Thru-the-Bottom Service Connection
capability allows
power and control wiring to be routed through the unit basepan
and roof curb (if installed), thereby minimizing roof penetrations
(to prevent water leaks). Both power and control connections
are made on the same side of the unit to simplify installation.
The Non-Corrosive, Sloped, Condensate Drain Pan
is in
conformance with ASHRAE (American Society of Heating,
Refrigeration, and Air Conditioning Engineers) Standard 62 to
meet many Indoor-Air Quality (IAQ) specifications. The con-
densate drain pan offers both bottom and end drain capability
Model 551B
Dura
Pac
Plus Series
Sizes 036-150
3 to 12
1
/
2
Tons
551B036-072
551B090-150

Summary of content (68 pages)