Operation Manual

11
selections. Select COMFORT PROFILES, then select the HUMIDITY
AND FRESH AIR PROFILES option.
d Touch AWAY to set your fresh air settings while you are away
from home.
S If a ventilator is installed in your home, select the amount of fresh air to
circulate during heating mode by touching HEATING FRESH AIR.
d You will have the option of choosing between AUTO, MANUAL,
or OFF.
d The AUTO setting will allow the system to choose the fresh air
setting in a range of Low, Medium or High, as selected by you.
d The MANUAL setting allows you to select the percentage of fresh
air to supply to your home.
d Use the Up (Y) and Down (B) buttons to set the desired ventilator
speed level.
d Press SAVE when finished, or CANCEL to discard any changes.
S If applicable, next select the amount of fresh air to circulate during cool-
ing mode by touching Cooling Fresh Air. Again, you will have the op-
tion of choosing among AUTO, MANUAL,orOFF.
d Use the Up (Y) and Down (B) buttons to set the desired ventilator
speed level.
d Press SAVE when finished, or CANCEL to discard any changes.
Programming the Evolution Connex Control
Touching the SCHEDULES icon provides three options. You may select to be
guided though the process, choose to handle the scheduling yourself or upload your
schedule from a USB d rive.