T6--NRH, T6--NHP, T6--NAC Preferredt Series Non--Programmable Thermostat Owner’s Manual
YOU WILL LOVE THIS THERMOSTAT. You have the Preferredt thermostat. This unique device’s state-- of-- the-- art technology makes it easier than ever for you to keep your home comfortable. And with an ultra-- thin profile and a selection of attractive faceplates, it is easily the most decorator-- friendly thermostat available.
TABLE OF CONTENTS BUTTON IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ON-- SCREEN INDICATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 QUICK START Setting or changing the temperatures for heating and cooling . . . . . . . . . . . . . . 10 Understanding Touch ’N’ Go . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 OPERATING THE THERMOSTAT Using the Touch ’N’ Go feature . . . . . . . . . .
TABLE OF CONTENTS Using normal humidify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Using auto humidify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 How to turn off the humidify or dehumidify feature . . . . . . . . . . . . . . . . . . . . 24 Using emergency heat (heat pump systems only) . . . . . . . . . . . . . . . . . . . . . . 25 Using the thermostat to turn the heating and cooling system off . . . . . . . . . . .
TABLE OF CONTENTS SPECIAL FEATURES Hybrid Heat (heat pump systems only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Service reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Outdoor temperature display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Auto changeover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 WHAT IF . . .
TABLE OF CONTENTS COMMON TERMS AND WHERE TO FIND THEM Auto changeover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Auxiliary heat (heat pump systems only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Backlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Dehumidify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BUTTON IDENTIFICATION off Em heat b c mode a fan aux heat on 2 fan auto fan on cool on 2 set at check UV light check filter check hum pad home away features i h sleep done g 6 f e d
BUTTON IDENTIFICATION a. FAN Selects whether the fan operates continuously (on) or only when needed for heating or cooling (auto) b. MODE Selects whether thermostat is set for heating, cooling, emergency heat, auto (heat and cool as needed), or off c. UP Increases the temperature or adjusts the screen selection up when setting advanced features d. DOWN Decreases the temperature or adjusts the screen selection down when setting advanced programming features e.
ON--SCREEN INDICATORS 8 9 7 5 4 3 10 off Em heat 6 11 mode fan aux heat on 2 fan auto fan on cool on 2 set at check UV light check filter check hum pad 2 home away sleep 1 12 13 features done 8
ON--SCREEN INDICATORS 1. Programming option; indicates which settings are being adjusted 2. Fan mode - on or auto 3. Filter, UV lamp, humidifier pad reminders 4. Indicates whether setting humidify or dehumidify preferences 5. System is in auxiliary (supplemental) mode 6. Heating set point 7. Current system mode - heating, cooling, emergency heat, heat/cool (auto), off 8. Current temperature 9. Indicates humidify or dehumidify settings 10. Fahrenheit or Celsius 11.
QUICK START Setting or changing the temperatures for heating and cooling Your thermostat is installed with pre-- set heating and cooling temperature settings. You can use these or change them so your home is as warm or as cool as you would like it to be. These steps will hold the temperature where you set it until you make another change. 1. Open the door. You will see the word heat or cool on the screen next to the pre-- set temperature, depending on the mode your system is in.
QUICK START Understanding Touch ’N’ Go The unique Touch ’N’ Go feature on your thermostat is a revolutionary tool that lets you use a simpler programming option - literally, touch and go - to help you get the maximum comfort control from the entire comfort system. With the touch of one Touch ’N’ Go button - home, away or sleep - you can tell your thermostat where you’ll be. It’s the ideal solution for somebody who prefers different comfort settings for different times of the day.
OPERATING THE THERMOSTAT Using the Touch ’N’ Go feature The Touch ’N’ Go feature on your thermostat involves the home, away and sleep buttons immediately under the display. You can either accept the preset temperature settings for when you are home, away or asleep, or set your own Touch ’N’ Go heating and cooling temperature settings.
OPERATING THE THERMOSTAT Use this blank grid to determine how warm or cool you want your home to be when you’re home, away or asleep.
OPERATING THE THERMOSTAT Setting the home temperature 1. Open the door. 2. Press the home button located under the display on the left. You will see a triangle icon (B) above the home button. This icon will always tell you whether you’re in the home, away or sleep setting. 3. You will see the heating and cooling temperatures that were set at the factory. To use these, just close the door. 4.
OPERATING THE THERMOSTAT 8. Press the up or down button until you reach the desired temperature setting. 9. Press and hold the home button for about three seconds. The home arrow will be displayed, indicating that the thermostat has saved your settings.
OPERATING THE THERMOSTAT Setting the away temperature 1. Press the away button located under the display in the center. You will see a triangle icon (B) above the away button. 2. You will see the heating and cooling temperatures that were set at the factory. To use these, just close the door. 3. To change the heating settings, press the mode button until you see the word heat on the screen on the left. 4. Press the up or down button on the right until you reach the desired temperature setting.
OPERATING THE THERMOSTAT 7. Press the up or down button until you reach the desired temperature setting. 8. Press and hold the away button for about three seconds. The away arrow will be displayed, indicating that the thermostat has saved your settings.
OPERATING THE THERMOSTAT Setting the sleep temperature 1. Press the sleep button located under the display in the center. You will see a triangle icon (B) above the sleep button. 2. You will see the heating and cooling temperatures that were set at the factory. To use these, just close the door. 3. To change the heating setting, press the mode button until you see the word heat on the screen on the left. 4. Press the up or down button on the right until you reach the desired temperature setting.
OPERATING THE THERMOSTAT 7. Press the up or down button until you reach the desired temperature setting. 8. Press and hold the sleep button for about three seconds. The sleep arrow will be displayed, indicating that the thermostat has saved your settings. 9. Close the door.
OPERATING THE THERMOSTAT Using the fan When the fan is on, it helps distribute air throughout your home for a more even temperature in all spaces. You can set the thermostat so that the fan runs only during your heating and cooling cycles (auto mode) or to run continuously. The thermostat is set at the factory to run the fan automatically as needed (“auto fan”). Here’s how to change the setting so it runs continuously. 1. Open the door. 2. Press the fan button on the left.
OPERATING THE THERMOSTAT Changing the humidity level Your thermostat offers three humidity options: normal, auto and off. It is set at the factory for “normal humidify,” which is a fixed setting based on how much humidity you want in the home. This humidity level remains constant, regardless of the outdoor temperature. You can manually adjust the humidity level according to your own preferences.
OPERATING THE THERMOSTAT 3. Press the up or down button to change the setting. You can set the humidity between 10% and 46%; the dehumidify range is from 46% to 66%. 4. Close the door. Using auto humidify The auto humidify feature automatically adjusts the amount of humidity according to the outside temperature when an outdoor temperature sensor is installed. It can be manually adjusted when there is too much condensation accumulating on windows or the air seems too dry.
OPERATING THE THERMOSTAT 1. Open the door. 2. Press the features button twice. The first press will display the outdoor air temperature and the second press will display the humidify settings. The display will include the humidity level and the humidity setting. 3. Press the mode button until the screen displays auto and a set at number. (Auto indicates you have put the thermostat in auto humidify mode.) 4. Press the up or down button to change this auto humidify set at number.
OPERATING THE THERMOSTAT How to turn off the humidify or dehumidify feature Here’s how to turn off the humidify and/or dehumidify features. 1. Open the door. 2. Press the features button twice. The first press will display the outdoor air temperature and the second press will display the humidify settings. 3. Press the mode button until the screen says OF. 4. Close the door.
OPERATING THE THERMOSTAT Using emergency heat (heat pump systems only) Emergency heat is useful when the automatic auxiliary heat system can’t keep up with demand. (Systems with heat pumps use “auxiliary heat” when it’s too cold outside for the heat pump to heat the house without help. The display indicator for this is auxiliary heat on.) If the heat pump compressor that works with auxiliary heat fails, or if the heat pump isn’t working at all, you can turn on the emergency heat for that extra help.
OPERATING THE THERMOSTAT Using the thermostat to turn the heating and cooling system off Here’s how to use the thermostat to turn the heating and cooling system off. 1. Open the door. 2. Press the mode button on the left repeatedly until the display shows off shows in the upper left. 3. Close the door.
ADVANCED OPTIONS Advanced options display codes chart You can customize a few thermostat features. This chart shows which features you can change and the codes associated with them. The codes will appear on the display after following the instructions below.
ADVANCED OPTIONS Clearing the reset reminders The thermostat tells you when it’s time to change or service the UV light in the evaporator coil box connected to the furnace (if equipped), humidifier pad (if equipped), and furnace filter. (See page 35 for more information.) When the reminder icons are displayed on the screen, pressing and holding the done button for about three seconds clears all reminders on the screen.
ADVANCED OPTIONS 4. Press and hold the done button for about three seconds to remove the reminder. The percentage associated with it will go down to zero. 5. Press the done button. 6. Close the door.
ADVANCED OPTIONS Changing from Fahrenheit to Celsius Your thermostat is preset to display the temperature in degrees Fahrenheit. You can change this to Celsius. 1. Open the door. 2. Press and hold the features button for about three seconds. The screen will display 01 and the three reset reminders, as enabled by your installer. 3. Press the up button under the configuration number, 01. The number will change to 02 with F (Fahrenheit) next to it. 4. Press the sleep button under the F so it flashes. 5.
ADVANCED OPTIONS Adjusting or turning off the continuous backlighting Your thermostat features a continuous low level backlighting until you press any button, which increases the lighting temporarily. You can adjust the intensity of the backlighting or turn if off completely. Here’s how. 1. Open the door. 2. Press and hold the features button for about three seconds. The screen will display 01 and the three reset reminders. 3. Press the up button twice to advance from 01 to 03. 4.
ADVANCED OPTIONS Keypad lockout The keypad lockout feature lets you partially “lock” the thermostat so that you can change only the temperature or lock it completely, allowing no changes. Here’s how to lock the keypad on either level. 1. Open the door. 2. Press and hold the features button for about three seconds. The screen will display 01 and the three reset reminders. 3. Press the home button under the configuration number, 01, repeatedly until it changes to 04. 4.
ADVANCED OPTIONS Unlocking the keypad Here’s how to temporarily unlock the keypad after you have locked it. 1. Open the door. 2. Press and hold the up and down buttons on the right simultaneously for about five seconds. 3. The padlock icon will disappear. This means the keypad is unlocked and can be used. The keypad will revert back to the locked state after you’ve stopped pushing buttons for two minutes. 4. Close the door.
SPECIAL FEATURES Hybrid Heat (heat pump with a furnace system only) This thermostat works with the Carrier Hybrid Heat systems offering maximum comfort and economy by automatically controlling whether your system delivers heating with the heat pump, with the furnace, or with both options working together.
SPECIAL FEATURES Outdoor temperature display The thermostat automatically displays the outdoor temperature when you press the features button. Auto changeover The thermostat displays one of five modes: heat, cool, Em heat (heat pump version only), heat cool (auto mode) and off. When the mode selection is for both heating and cooling - auto mode - the thermostat is in auto changeover mode.
WHAT IF . . . “Aux heat on” is displayed (heat pump and Hybrid Heat systems only) Aux heat on is auxiliary heat. It applies only to the heat pump version. If it is on, you will see aux heat on. When it is displayed, it means the system has determined that it’s too cold outside for your heat pump to heat the house without help, so it’s getting help from the electric heaters. This happens automatically.
WHAT IF . . . You get a service reminder message Service reminder messages - check UV light, check hum pad, check filter - tell you that it’s time to change the UVC lamp in the evaporator coil box connected to the furnace (when installed), humidifier pad (when installed), and furnace filter. Make the indicated changes with the exception of the UV lamp - for important safety reasons, ask your dealer to replace that.
COMMON TERMS AND WHERE TO FIND THEM Auto changeover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 36 This feature automatically switches your system from heating to cooling - or from cooling to heating - whenever necessary when in auto mode only (heat/cool). Auxiliary heat (heat pump systems and Hybrid Heat systems only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
COMMON TERMS AND WHERE TO FIND THEM Emergency heat (heat pump systems and Hybrid Heat systems only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 25 You can manually set the thermostat to use emergency heat but it is the most expensive option. If it’s using emergency heat, the display will show Em heat when you press the mode button. Hybrid Heat (heat pump with a furnace system only) . . . . . . .
COMMON TERMS AND WHERE TO FIND THEM Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 36 This term refers to the type of operation your system is performing. The options are heat, cool, emergency heat, auto (heat/cool) and off. Service reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 35 The thermostat tells you when it’s time to change the UVC lamp (if equipped), humidifier pad (if equipped) and furnace filter.
THERMOSTAT LIMITED WARRANTY Bryant Heating & Cooling Systems Limited Warranty for Thermostats FOR WARRANTY SERVICE OR REPAIR: Contact the installer or a Bryant dealer. You may be able to find the installer’s name on the equipment or in your Owner’s Packet. You can also find a Bryant dealer online at www.bryant.com For help, contact: Bryant Heating & Cooling Systems, Consumer Relations, P.O.
THERMOSTAT LIMITED WARRANTY OWNER--OCCUPIED, RESIDENTIAL APPLICATIONS This warranty is to the original purchasing owner and is transferable only to the extent and as stated in the Warranty Conditions and below. The warranty period in years, depending on the part and the claimant, is as shown in the chart below.
THERMOSTAT LIMITED WARRANTY WARRANTY CONDITIONS: 1. To obtain the longer warranty periods as shown in the table under original owner, for the original purchaser, the product must be properly registered at www.bryant.com within ninety (90) days of original installation. In jurisdictions where warranty terms conditioned on registration are prohibited by law, registration is not required and the longer warranty period shown will be apply. 2.
THERMOSTAT LIMITED WARRANTY PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY OR CONDITION LASTS, SO THE ABOVE MAY NOT APPLY TO YOU. THE EXPRESS WARRANTIES MADE IN THIS WARRANTY ARE EXCLUSIVE AND MAY NOT BE ALTERED, ENLARGED, OR CHANGED BY ANY DISTRIBUTOR, DEALER, OR OTHER PERSON, WHATSOEVER. THIS WARRANTY DOES NOT COVER: 1.
Copyright 2012 Bryant Heating & Cooling Systems, 7310 W Morris St. Indianapolis, IN 46231 OM---T6NRH ---04BR Replaces: OM--- T6NRH--- 03BR Edition Date: 05/12 Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
