B100 INTEGRATED AMPLIFIER OWNER’S MANUAL For models B100, B100-DA & B100-P
IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage “ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
B100 TWO CHANNEL POWER AMPLIFIER INTRODUCTION: Thank you for purchasing a Bryston B100 integrated amplifier. We are confident it will provide you with many years of musical enjoyment. We would welcome any suggestions or comments you may have regarding the operation of your Bryston amplifier. In the unlikely event that your amplifier may require service Bryston recommends that you retain the original shipping box and packaging material for future use if required.
B100 TWO CHANNEL POWER AMPLIFIER analog audio input signals. • In B100-P models, which are equipped with a moving-magnet phono equalization module, the inputs labeled Aux1/Phono accept moving magnet phono cartridge inputs. These inputs are NOT line level inputs in the B100-P and cannot be used as such. LINE LEVEL ANALOG AUDIO OUTPUTS : The Bryston B100 integrated amplifier comes equipped with 2 pairs of gold plated analog RCA jacks for outputs: PREAMP OUT and RECORD OUT.
B100 TWO CHANNEL POWER AMPLIFIER ANALOGAux2 / DIGITALSelect: In B100-DA models: when this LED is illuminated green concurrently with either D1, D2, D3 or d4 LEDs, it indicates that the digital inputs d1 (SPDIF), d2 (SPDIF), d3 (TOSLINK) or d4 (TOSLINK) have been selected. In B100 & B100-P models: when illuminated green this LED indicates that the line level analog audio input AUX-2 has been selected.
B100 TWO CHANNEL POWER AMPLIFIER batteries are correctly oriented and properly seated in the battery holder. The B100 remote is a full function remote. It allows selection of all sources, volume up or down (the volume control is a motor-driven design), mute ,left/right balance, power on/off and discrete code entry. We recommend maintaining a direct line-of-sight between the hand held remote unit and the front of the B100 to ensure the most efficient operation of the remote features.
B100 TWO CHANNEL POWER AMPLIFIER Remote Control” & “Wired RS232 Remote Control”. To reassign PASS THROUGH mode to a different input source simply select the desired input and re-send the “245” code to the B100. To turn the deactivate PASS THORUGH mode, select the current Pass Through input and then send the “245” code to the B100. The “245” toggles PASS THROUGH mode on and off. DIGITAL-to-ANALOG (D/A) CONVERTER OPTION: The B100-DA comes equipped with stereo Digital-to-Analog converter (D/A or DAC) module.
B100 TWO CHANNEL POWER AMPLIFIER 6
B100 TWO CHANNEL POWER AMPLIFIER 7
There are no user serviceable parts inside the B100. Please refer any servicing to qualified personnel. BRYSTON LTD., 677 NEAL DRIVE, P.O.
