B60R INTEGRATED AMPLIFIER OWNER’S MANUAL for Models B60R, B60RP, B60RDA
IMPORTANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage “ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
B60 INTEGRATED AMPLIFIERS power to the amplifier turned OFF. Store them in a safe place for future use. These pre-out/power-in connectors provide for complete separation of the preamplifier and power amplifier sections. This allows you to easily accommodate the integration of a surround sound processor into your system and still maintain the control functions available on the front panel of the B60.
B60 INTEGRATED AMPLIFIERS recording output. This feed is unaffected by the operation of other front panel controls. Tape Inputs: The “FROM TAPE” (unbalanced RCA) inputs are useful for monitoring tape playback or processed signals. Moving the “Tape/Normal” toggle to Tape’ (up) position monitors the recorded signal on recorders equipped with a separate playback head, or the processed signal when using a signal processor. Input sensitivity is 500mv, input impedance is 10K ohms.
B60 INTEGRATED AMPLIFIERS SPECIFICATIONS ADDITIONAL SPECIFICATIONS for B60DA/B60RDA DIGITAL INPUTS: GENERAL: DIMENSIONS: Standard version: Rack mount version: 17” x 1.75” x 11” (43.18 x 4.44 x 28cm) 19” x 1.75” x 11” (48.26 x 4.44 x 28cm) WEIGHT: 17 lbs (7.5 kg) INPUT SAMPLE RATE: WORD LENGTH: DATA FORMAT: THD+N: ADDITIONAL SPECIFICATIONS for B60P/B60RP PHONO INPUTS: PREAMPLIFIER Section: FREQUENCY RESPONSE: MAXIMUM OUTPUT: IMD/THD: SENSITIVITY: NOISE: 16kHz to 108kHz.
B60 INTEGRATED AMPLIFIERS 4
BRYSTON LIMITED WARRANTY Bryston audio circuits are warranted to be free from manufacturing defects for twenty (20) years from the original date of manufacture. The warranty includes parts and labour. Bryston Digital circuits are warranted for five years from the original date of manufacture. The warranty includes parts and labour. Bryston circuits having motorized moving parts are warranted for three years from the original date of manufacture. The warranty includes parts and labour.
CAUTION!: NO USER SERVICABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONEL REPLACING FUSES: All fuses are 5mm x 20mm, time lag type and are accessible only by removing the top cover. CAUTION! When replacing fuses, disconnect the power cord and all other cables from the B60 before opening the unit! Recommended replacement fuses: for 100/120VAC models: for 220, 230 & 240VAC models: Littlefuse 218.315 Littlefuse 218.160 Bussmann GMC-315mA Bussmann GMC-160mA BRYSTON LTD., 677 NEAL DRIVE, P.O.
