BRYSTON OWNER’S MANUAL Instructions For Bryston Phono Stage Model BP 1.
GENERAL INSTRUCTIONS Warranty Information: Thank you for choosing a Bryston product. We welcome any suggestions you may have, or comments regarding the operation of your amplifier. We consider you, our customer, to be Bryston’s most important resource, and your opinion is very much appreciated. Bryston products are warranted to be free from manufacturing defects for a minimum of 20, (twenty), years from the original date of manufacture. This includes all parts, labor and oneway return shipping.
BRYSTON BP 1.5 MANUAL BP 1.5 Description Turn On Relay: Preamplifier Gain: The BP1.5 utilizes an output shunting relay with approximately a 3 second delay at start-up to allow any system transient/thumps to settle out before connecting the signal. The front panel LED turns Red on power up and clicks to Green when status is confirmed. BP1.5 includes two different amplifier modes to accommodate both MM (moving-magnet) and MC ( moving-coil) Phono Cartridges.
BRYSTON BP 1.5 MANUAL Bryston’s BP1.5 Specifications: Frequency response: (With Inverse RIAA filter) MC mode; Between 20Hz to 20KHz less than +/- 0.5 dB. MM mode; Between 20Hz to 20KHz less than +/- 0.1dB Rated output: 5 Volts RMS High level sensitivity: MM mode; 5 mV MC mode; 500uV Distortion: Less than .
BRYSTON BP 1.5 MANUAL Typical Hookup: Shown below is a typical hookup using a BP 1.5 Phono Preamplifier with and without a Bryston BP 25 Preamplifier.
BRYSTON 20 -YEAR WARRANTY Bryston products are warranted to be free from manufacturing defects for a minimum of twenty years from the original date of manufacture. This includes parts, labour and return shipping to the first owner and all subsequent owners. Warranty coverage is automatic and commences with the original date of manufacture which is kept on file at Bryston.
TO PREAMPLIFIER BP1.5 TURNTABLE POWER SUPPLY MPS-1 FIGURE 1 TO RIGHT/ LEFT SIDES OF AMPLIFIER RCA / XLR INPUTS BP20 OR BP25 BP1.
FIGURE 3
INSTRUCTION FOR MM INPUT CAPACITANCE LOADING SWITCH Maximum input capacitance is 188pf Total input capacitance is 141pf Total input capacitance is 94pf Total input capacitance is 47pf There is no input capacitance in this case FIGURE 4
