BRYSTON OWNER’S MANUAL Instructions For Bryston ST Series Amplifiers Model 14B ST
GENERAL INSTRUCTIONS Warranty Information: Thank you for choosing a Bryston product. We welcome any suggestions you may have, or comments regarding the operation of your amplifier. We consider you, our customer, to be Brystons’ most important resource, and your opinion is very much appreciated. Bryston products are warranted to be free from manufacturing defects for a minimum of 20, (twenty), years from the original date of manufacture. This includes all parts, labor and oneway return shipping.
BRYSTON 14B ST MANUAL 14B ST Rear Panel Connections: Input: The 14B ST has two inputs per channel, one for a balanced source, and one for single ended or unbalanced source. The BAL input connector will accept either a 3 pin ‘XLR’ type or a 1/4” Tip/Ring/Sleeve type. The positive (+) terminal is pin 2 on the ‘XLR’ and tip on the TRS. The input impedance is 15K ohms. The input pins are gold plated. Input sensitivity is selectable using the ‘INPUT’ slide switch.
BRYSTON 14B ST MANUAL Clipping Indicators: The 14B uses tricolor LEDs with green indicating power on, flashing red indicating actual overload or distortion and yellow/orange indicating thermal shutdown. Upon power-up the 14B’s LED’s will remain “red” until all voltages stabilize and the unit comes out of mute and the LED turns green.
BRYSTON 14B ST MANUAL SPECIAL INSTRUCTIONS FEATURES AND SPECIFICATIONS: Maximum continuous output power with both channels driven can only be realized on a 120 Volt 20 Amp or 230 Volt 10 Amp version of the 14B ST Music is a “Dynamic and Transient” condition and the power requirements fluctuate up and down over time with the audio signal. Therefore, under most listening conditions the 15Amp/120 Volt version will be all that is required for the majority of domestic audio/video systems.
BRYSTON 20 -YEAR WARRANTY Bryston products are warranted to be free from manufacturing defects for a minimum of twenty years from the original date of manufacture. This includes parts, labour and return shipping to the first owner and all subsequent owners. Warranty coverage is automatic and commences with the original date of manufacture which is kept on file at Bryston.
