User Guide

26 Navigation
Back to Top
Download Maps
The Rider 750 comes with preloaded maps of major regions around the world.
1. Download the desired map zip file from the official Bryton Website. Please unzip it.
Please do not rename the file(s) or change the file extension(s) in the unzipped folder, as
this may cause errors to occur.
2. Using the Bryton device’s original USB cable, plug the device into the PC and in the
“Bryton” disk, navigate to [Bryton>MAP].
3. Copy the unzipped folder and paste in the [Bryton>MAP>Update] folder.
*If there is not enough free space on the device to add the map(s), please remove
unnecessary map folders are stored in the following locations: [Bryton>MAP>Update]
& [Bryton>Map>MapData]. After adding the map file(s), please ensure that the device
still retains at least 100MB of storage space in order to operate properly.
4. After the map file(s) has been successfully added to the device, go to the
[Bryton>MAP>Data] folder and delete all of the contents and folders (these will
repopulate after first system start-up).
5. Unplug device and power on, allowing device to acquire satellite connection for a few
minutes. The map should then successfully load and appear on the device.
Rider 750