User Guide

33 Settings
Back to Top
Manage Sensors via Bryton Active
Heart Rate
Name Sunny’s HR
Type
Status
ANT+
120311ID
Remove
Connect
1. Select Settings in the home page.
2. Find Sensors.
Add New Sensors
1. Select Add Sensor to add new sensors.
2. Choose any type of sensor that you would
like to pair with.
3. To pair sensors with your device, please
have Bryton Smart Sensors installed first,
then wear a heart rate monitor or rotate
the crank and wheel a few times to wake
Bryton Smart Sensors up.
4. For Bike Radars, E-bikes, and Ess/Di2,
please turn the power on before starting
pairing.
5. Let the device detect sensors automatically
or enter a sensor ID manually.
6. Pick a detected sensor you would like to
pair with then select OK to save.
Manage Sensors
1. Select the sensor you would like to
edit.
2. Turn on or off the status to activate or
deactivate the sensor.
3. Edit the name by clicking
.
4. Remove the sensor by pressing Remove.
Switch Sensors
1. Select the sensor you would like to switch
to.
2. Press Connect to pair the sensor.
NOTE: Sensors only need to be switched if they are in the same type and both are already
added in the list.
Sensors
Add Sensors
My Sensors
Heart Rate
ANT+ 120311
HR Bryton
ANT+ 1000
Cadence
BLE 132310
Sunny’s Speed
ANT+ 120345
Power
ANT+ 123456
Manage Sensors