User Manual

26Settings
ANT+/ BLE Sensors
Rider 320 is compatible with both ANT+ and BLE sensors. You can customize the
respective sensor settings such as rescan the sensor to pair with your device or enable/
disable the function.
Settings
Exercises
UUID
General
Sensor
>
Sensors
Heart Rate
Speed
Cadence
Speed/CAD
Power
Di2
>
Heart Rate
Status: Off
ID:
More
>
Heart Rate
Rescan
ANT+ Sensors
Or
BLE Sensors
Heart Rate
Status: Set
ID XXXXXXXXX
Type: ANT+
More
Heart Rate
Status: Set
Bryton HR XXXX
Type: BT
More
1. In the Settings menu, press to select Sensor and press to confirm.
2. Press
to select Heart Rate, Speed, Cadence, Speed/CAD or Power Meter and press
to confirm selection.
3. To pair sensors with your device, please have the Bryton Smart sensors installed first,
wearing the Heart Rate sensor or rotating the crank and wheel a few times to wake up the
Bryton Smart Sensors.
4. Press
to enter submenu. Press to select desired setting and press to
confirm.
• Rescan: rescan to detect the sensor for pairing with your device.
• Turn on / Turn off: enable / disable the sensor.
5. Press
to exit this menu.