User Manual

28Settings
Altitude
After receiving GPS signal, the Rider 320 will calibrate altitude automatically based on GPS
altitude data. You can also set the altitude setting for the current location and four other
locations manually.
Current Altitude
Altitude
M
31
1. In the Settings menu, press and then press
to select Altitude.
2. Press
to enter Altitude.
3. Press
to adjust value of current altitude and
press to confirm.
4. Press
to exit this menu.
NOTE: The value of altitude on the meter mode will be changed once current altitude
is adjusted.
NOTE: Current Altitude can also be adjusted via Bryton Active App. Please go to page 33
tollearn how to calibrate altitude.
Other Location Altitude
With other locations altitude setting, you can save a value of altitude of your planned
location, and do calibration once you are in the appointed position.
Location 1
Altitude
10m
Calibrate
1. In the Settings menu, press and then press
to select Altitude.
2. Press
to select Location 1, Location 2, Location 3,
Location 4 or Location 5 and press to enter.
3. To set altitude of the location, press
to enter
Altitude.
4. Press
to adjust value of altitude and press
to save.
5. To calibrate the set altitude, press
to select
Calibrate and press
to confirm.
6. Press
to exit this menu.