User Manual

6Getting Started
Step 1: Charge your Rider 320
Connect Rider 320 to a PC to charge the battery for at least 4 hours.
Unplug the device when it is fully charged.
• You may see a white screen when the battery is really low. Keep the device plugged for
several minutes, it will automatically turn-on after battery is properly charged.
• The temperature suitable for charging battery is 0˚C~40˚C. Beyond this temperature
range, charging will be terminated and the device will draw power from battery.
Step 2: Turn On Rider 320
Press to turn on the device.
Step 3: Initial Setup
When turning Rider 320 on for the first time, you will need to follow on screen instructions
to complete setup.
1. Select the display language.
2. Select the unit of measurement.
NOTE:
• Only when you choose English for the display language, you will need to select the unit
of measurement. Otherwise, default would be metric unit.
• To change the device language, pair your device with the Bryton Active App and in
the app navigate to Settings > General> System Language. For more information on
changing device language, please refer to page 32.