20+ User's Manual
Table of Contents Getting Started ................ 4 Settings .......................... 12 Your Rider 20+.............................. 4 My Lap........................................ 12 Accessories .................................. 5 Display ....................................... 14 Status Icons ................................. 5 Step 1: Charge your Rider 20+.... 6 Sensors....................................... 16 Step 2: Turn On Rider 20+........... 6 Change System Settings ...........
Always consult your physician before you begin or modify any training program. Please read the details in Warranty and Safety Information guide in the package. Product Registration Help us better support you by completing your device registration using Bryton Bridge. Go to http://support.brytonsport.com for more information. Bryton Software tracks and analyze your data on the web.
Getting Started This section will guide you on the basic preparations before you start using your Rider 20+. Your Rider 20+ r p m 1/1 1 20+ 1 1 BACK ( 2 ) 3 PAGE ( • Press to return to the previous page or cancel an operation. • When recording, press to pause recording. Press it again to stop recording. 2 LAP/OK ( 3 ) • Press and hold to turn the device on/ • selection. • In free cycling, press to start recording. • When recording, press to mark the lap.
ENGLISH Accessories The Rider 20+ comes with the following accessories: • 4-pin USB cable • Bike mount Optional items: • Heart rate belt • Speed sensor • Speed/Cadence Dual sensor • Cadence sensor Status Icons Icon Description Icon Bike in use Description Heart Rate Sensor Active 1 Bike 1 Cadence Sensor Active 2 Bike 2 Speed Sensor Active GPS Signal Status Dual Sensor Active Training mode Weak signal Meter mode Strong signal Log Record in Progress Power Status Recording is paused Ful
Step 1: Charge your Rider 20+ Connect Rider 20+ to a PC to charge the battery for at least 3 hours. Unplug the device when it is fully charged. reset r p m 1/1 1 20+ Step 2: Turn On Rider 20+ Press and hold to turn on the device. Step 3: Initial Setup instructions to complete setup. 1. Select the display language. 2. Select the daylight saving time. 3. Select the unit of measurement. • Gender • Height • Weight analysis. 5. Read and accept the Safety Agreement.
• Free ride: Select Meter from the menu list and start free ride. • Start an exercise and record your data: In meter view, press to start recording, press to pause, press again to stop. • Start a training: Select Train from the menu list. Training can be based on time, distance, calories burn, or the saved workouts. Reset Rider 20+ To reset the Rider 20+, long press all three keys ( / / ) at the same time. How to connect your device with brytonsport.com 1. Download Bryton Bridge 2 a.
Training Bicycling is one of the best types of exercise for your body. It helps you to burn your calories, simple workouts and use the Rider 20+ to track your training or workout progress. 08:08 09/09 Meter Train History Settings 1. In the main screen, press to select Train. 2. Press to enter the Training menu. 1 Simple Workouts You can set simple workouts by entering your time or distance goals. The Rider 20+ Time Time 1. In the Training menu, press To Plan > Time and press 2.
Name Name 001 A 001 OK/EXIT 1. Press / ENGLISH Using the On-screen Keyboard END OK/EXIT to select the input character. • Select DEL to erase the data. 2. Press to confirm the selection. 3. When finished, press / to select END and press to confirm. NOTE: If user does not enter the workout name, the system will automatically label the file name according to the current date and time.
NOTE: If the selected workout includes several interval settings, a workout details appear on the screen. Select Start and press to proceed with the workout. Stop Training You can stop the current training after you have reached your goal or when you decide to end the current training. r p m 1/1 Do you want to stop? Yes 1. Press press to pause the recording and again to stop the recording. 2. A “Do you want to stop?” message appears on the screen.
Delete 1. In the main screen, press History > View and press to select . to select Delete and press to enter the history list. 2. Press Do you want to delete? 3. Press to select a training history from the list and press to delete the selected history. Yes 4. A “Do you want to delete?” message appears on the screen. To delete the data, press / to select Yes and press to confirm. History Flow trip = Trip Time 09/19 21:44 AVG 00:03:08 00:02:25 3.69 39 04 laps More 1/20 trip ride km MAX 75.
Settings With the Settings feature, you can customize display settings, sensor settings, Settings My Lap Display Sensors 1. In the main screen, press 2. Press to select Settings. to enter the Settings menu. My Lap Lap by Location By Location Use current location as lap location? Yes 1. In the Settings menu, press to select My Lap > By Location and press . to select Detail info and press to change the setting. 2. Press 3. A “Use current location as lap location?” message appears on the screen.
Lap by Distance 1. In the Settings menu, press to select My Lap > Distance and press . Distance to select Detail info and press to change the setting. 2. Press 10.0 Set 3. Press / to select your desired distance and press KM 4. Press to exit this menu. OK/EXIT Display You can set the display settings for the Meter, Lap, and Auto Switch. You can also set the Auto Switch interval setting.
4. Press 5. Press / to select the desired setting and press to confirm to confirm. to exit this menu. NOTE: The number of data fields shown on the screen depends on the “Data fields” selection. Time: Avg HR: b p m Max HR: b p m Time: Avg HR: 1 b p m 1 2-grid display 3-grid display Lap Display 1. In the Settings menu, press to select Display > LAP > Meter 1 or Meter 2 and press . Lap Meter1 On Meter2 On 2. Press / to select the number of data fields and press to confirm. 3.
Auto Scroll Auto scroll 1. In the Settings menu, press to select Display > Auto scroll and press . Auto scroll 2. Press to select the setting that you want to change and press to enter its submenu. On Interval 5 sec • Auto scroll: enable/disable the auto switch. • Interval: set the interval time. 3. Press / to adjust the desired setting and press to confirm. 4. Press to exit this menu.
2. Press to select Sensors > Heart Rate, Speed, Cadence, or to select the desired setting and press to confirm. • Rescan: rescan to detect the sensor. • Turn on/Turn off: enable/disable the sensor. 3. Press to exit this menu. NOTE: • When the heart rate monitor is paired, the heart rate icon appears on the main screen. • While pairing your speed/cadence sensor and the heart rate belt, please make sure there is no other cadence/speed sensor within 5 m.
Personalize Bike Profile You can customize and view your bicycle(s) profile. 1. In the Settings menu, press to select Bike > Bike 1 or Bike 2 and press . Bike 1 Bike Type Folding Bike Weight 13 kg Wheel 1700 mm 2. Press to select the setting that you want to change and press to enter its submenu. • • • • Bike Type: select the bike type. Weight: set the bike weight. Wheel: set the bike wheel size. Activate: select to activate the bike. 3. Press / to adjust the desired to confirm. setting and press 4.
You can customize the device system settings such as backlight off, self lap, key tone, beep, time/unit data format, on-screen display language, and data reset. Backlight Off Back light Auto Never 1. In the Settings menu, press to select System > Backlight Off and press . 2. Press / and press 3. Press to select the desired setting to confirm. to exit this menu. 1 min 10 min Key Tone Key Tone On Off 1. In the Settings menu, press to select System > Key Tone and press . 2. Press / and press 3.
Alert Alert On Off 1. In the Settings menu, press / select System > Alert and press / 2. Press and press 3. Press to exit this menu. Date Time +0:00 mmddyyyy 12hr +1:00 yyyymmdd 24hr ddmmyyyy Daylight Save Unit Metric Imperial Unit 20 Settings Date format . to select the desired setting to confirm.
2. Press 3. Press / to select the desired setting/format and press to exit this menu. Language Language English Deutsch 1. In the Settings menu, press to select System > Language and press . 2. Press / and press 3. Press to select the desired setting to exit this menu. Français My Device Manager 1. Download Bryton Bridge 2. See page 7 for more details. 2. Turn on your device and connect it to your computer by using USB cable.
View GPS Status You can view the GPS signal information that your device is currently receiving. Status 121 . 000000 25 . 000000 1. In the Settings menu, press Status and press . to select 2. To set the signal search mode, press to confirm. Good 3. Press / and press • Off: Turn-off GPS functions. Choose this to save power when GPS signal is not available, or when GPS information is not required (such as indoor use). • Full Power: maximum position and speed accuracy, consumes more power.
ENGLISH Appendix + Rider 20 Item Description Display Physical Size 39.6 x 58.9 x 17 mm Weight 40g Operating Temperature -10°C ~ 50°C Battery Charging Temperature 0°C ~ 40°C Battery Li polymer rechargeable battery Battery Life 17 hours with open sky GPS Integrated high-sensitivity GPS receiver with embedded antenna RF Transceiver 2.4GMHz Ant+ Water Resistant IPX7 waterproof rating Speed/Cadence Sensor Item Description Physical size 34.2 x 46.7 x 13.
Heart Rate Monitor Item Description Physical size 67~100 x 26 x 15 mm Weight 14 g (sensor) / 35g (strap) Water Resistance 20 m Transmission range 5m Battery life 1 hour per day for 24 months Operating temperature 5oC ~ 40oC Radio frequency/protocol 2.4GHz / Dynastream ANT+ Sport wireless communications protocol Accuracy may be degraded by poor sensor contact, electrical interference, and receiver distance from the transmitter.
ENGLISH Install Rider 20+ + Mount Rider 20 to the Bike 1 2 4 3 20 + Ri de r2 0+ 20+ Appendix 25
Install the Speed/Cadence/Dual Sensor (Optional) 1 2 3 4 SP EE SPEED D CADENCE 5a 6a 7a SPEED 8a Speed SPEED SPEED Status: active ID XXXXXXXXX 3 SP EE D Rescan mm Turn Off Speed 20+ SP EE D SP Status: active ID XXXXXXXXX Rescan Turn Off EE D 20+ 5b 6b 7b CADENCE 8b Cadence Status: active ID XXXXXXXXX Rescan Turn Off m 3m 20+ Cadence Status: active ID XXXXXXXXX Rescan Turn Off 20+ 5c 6c 7c 8c Speed/CAD m 3m Status: active ID XXXXXXXXX Rescan Turn Off 20+ Speed/CA
Install Heart Rate Belt (Optional) Strap Electrodes SE OSE CL 4 SE CL O 3 CL O CL 2 O SE OPEN 1 OPEN OPEN OPE N 5 6 NOTE: • In cold weather, wear appropriate clothing to keep the heart rate belt warm. • The belt should be worn directly on your body. • Adjust the sensor position to the middle part of the body (wear it slightly below the chest). The Bryton logo shown on the sensor should be facing upward. Tighten the elastic belt firmly so that it will not turn loose during the exercise.
Wheel Size and Circumference The wheel size is marked on both sides of the tires. Wheel Size L (mm) Wheel Size L (mm) 12 x 1.75 935 24 x 1.75 1890 14 x 1.5 1020 24 x 2.00 1925 14 x 1.75 1055 24 x 2.125 1965 16 x 1.5 1185 26 x 7/8 1920 16 x 1.75 1195 26 x 1(59) 1913 18 x 1.5 1340 26 x 1(65) 1952 18 x 1.75 1350 26 x 1.25 1953 20 x 1.75 1515 26 x 1-1/8 1970 20 x 1-3/8 1615 26 x 1-3/8 2068 22 x 1-3/8 1770 26 x 1-1/2 2100 22 x 1-1/2 1785 26 x 1.
Taking good care of your device will reduce the risk of damage to your device. • Do not drop your device or subject it to severe shock. • Do not expose your device to extreme temperatures and excessive moisture. • The screen surface can easily be scratched. Use the non-adhesive generic screen protectors to help protect the screen from minor scratches. • Use diluted neutral detergent on a soft cloth to clean your device. • attempt to do so will make the warranty invalid.
Screen Terminologies Screen Display Terminology LapAvSpd lap average speed LapMaSpd lap maximum speed L'stLpAvSp last lap average speed LapDist lap distance L'stLpDist last lap distance L'stLapT last lap time LapAvHR lap average heart rate LapMaHR lap maximum heart rate L'LpAvHR last lap average heart rate L'A'MHR% lap average MHR percentage L'A'LTHR% lap average LTHR percentage Str'dRate stride rate AvStr'dRt average stride rate MaStr'dRt maximum stride rate LpAvSt'dR lap ave