User manual
Settings
14
Settings
With the Settings feature, you can customize altitude(Rider 210 only), display settings,
sensor settings, system settings, bike and user proles, GPS setup, and view device information.
My Lap
Altitude
Display
Sensors
Settings
1. In the main screen, press to select Settings.
2. Press
to enter the Settings menu.
My Lap
With My Lap feature, you can use your device to automatically mark the lap at a specic
location or after you have traveled a specic distance.
Lap by Location
By Location
Use current
location as
lap location?
Yes
1. In the Settings menu, press to select
My Lap > By Location and press .
2. Press
to select Detail info and press
to change the setting.
3. A “Use current location as lap location?”
message appears on the screen. To save
the data, press
to select Yes and
press to conrm.
4. Press
to exit this menu.
NOTE: If the GPS signal is not xed, a “No GPS signal. Searching GPS, please wait” message
appears on the screen. Check if the GPS is on and make sure you step outside to acquire
the signal.