User manual

Getting Started
6
Step 1: Charge your Rider 210/200
Connect Rider 210/200 to a PC to charge the battery for at least 3 hours.
Unplug the device when it is fully charged.
/
1 1
/
1 1
r
p
m
reset
Step 2: Turn On Rider 210/200
Press and hold to turn on the device.
Step 3: Initial Setup
When turning Rider 210/200 on for the rst time, the setup wizard appears on screen. Follow the
instructions to complete setup.
1. Select the display language.
2. Select the daylight saving time.
3. Select the unit of measurement.
4. Enter your “user prole”.
The “user prole” includes the following data settings:
Gender• Height• Weight•
It is recommended to input the data. The data accuracy will highly aect your training
analysis.
5. Scan the QR code with your phone to download the Bryton Mobile APP.
NOTE:
The Rider 210/200 was designed to wirelessly sync your data in the background using •
Bluetooth Smart.
For more instructions, please refer to • “Share Your Records” section.
6. Read and accept the Safety Agreement.