35 User's Manual
Table of Contents Getting Started................. 5 My Workout................................ 17 Your Rider 35................................ 5 Stop Training.............................. 17 Reset the Rider 35........................ 6 Find & Go......................... 18 Accessories................................... 6 Status Icons.................................. 6 Navigate Rides from History..... 18 Charge the Battery....................... 7 Navigate Rides from Planned Trip................
ENGLISH Time/Unit.......................................................29 Language.......................................................30 Erase Data......................................................30 View GPS Status......................... 31 View Firmware Version.............. 31 Appendix......................... 32 Specifications............................. 32 Battery Information................... 33 Wheel Size and Circumference............................ 34 Heart Rate Zones................
WARNING Always consult your physician before you begin or modify any training program. Please read the details in Warranty and Safety Information guide in the package. Product Registration Help us better support you by completing your device registration using Bryton Bridge. Go to http://support.brytonsport.com for more information. Bryton Software tracks and analyze your data on the web.
This section will guide you on the basic preparations before you start using your Rider 35. BACK 2 START/REC MODE 1 3 LAP Your Rider 35 4 35 1 Power • Press and hold to turn the Rider 35 on or off. • Press to return to the previous page or cancel an operation. 3 Mode / Up • Press to switch modes: Meter, Find & Go, Altitude Chart, and My Buddy. • In menu mode, press to move up to scroll through menu options. 2 Start / Stop • In menu mode, press to enter or confirm a selection.
Reset the Rider 35 To reset the Rider 35, press and release both and at the same time.
Warning: This product contains a lithium-ion battery. See the Warranty and Safety Information guide in the package for important battery safety information. reset To charge the battery, connect your Rider 35 to your computer using the USB cable.
Install the Speed/Cadence Sensor (Optional) 1 2 3 4 5a 6a 7a 8a m Speed Status: inactive START/REC ID 0 Rescan Turn on MODE BACK 35 LAP START/REC ID 0 Rescan Turn on LAP BACK Speed Status: inactive MODE 3m 35 7b 8b BACK m 3m START/REC 35 Cadence Status: inactive ID 0 Rescan Turn on MODE START/REC ID 0 Rescan Turn on LAP BACK Cadence Status: inactive MODE 6b LAP 5b 35 NOTE: To ensure optimum performance, the distance between the sensor and the magnet must be within 3
Strap Clip +SPORT Clips ENGLISH Install Heart Rate Belt (Optional) HeartWear 2.4GHz Digital FCC ID:04GHRMHW RY TE 032 2 V B ORAT 3 L AP Battery compartment 1 5 2 Electrodes 3 4 6 NOTE: • In cold weather, wear appropriate clothing to keep the heart rate belt warm. • The belt should be worn directly on your body.
Using the Power Adapter (Optional) 4 You can use the power adapter to charge the battery. reset 3 1 2 You can puchase different plug head(s) suitable in the country where you purchased the Rider 35.
button to turn the Rider 35 on. BACK Power button MODE Press and hold the Power ENGLISH Turn on the Rider 35 LAP START/REC 35 Acquire Satellite Signals Once the Rider 35 is turned on, it will automatically search for satellite signals. It may take 30 to 60 seconds to acquire signals. Initial Setup When turning the Rider 35 on for the first time, the setup wizard appears on screen. Follow the instructions to complete setup. 1. Select the display language and time zone. 2.
NOTE: Find & Go, Altitude Chart and My Buddy only appear in Training mode or Find & Go mode (which is in progress). 3. In free cycling, press to start recording log, and press again to stop recording. Manage Rider 35 Data via Your Computer 1. Connect your Rider 35 to your computer by using the USB cable. 2. Install the Bryton Bridge application. You can download the application at http:// bb.brytonsport.com. 3. Follow the on-screen instructions to transfer data to your computer.
Bicycling is one of the best types of exercise for your body. It helps you to burn your calories, lose weight, and increase your overall fitness. With the Rider 35 Training feature, you can set simple/zone based workouts and use the Rider 35 to track your training or workout progress. Training To Plan 1. In the main screen, press p/q to select Training. 2. Press to enter the Training menu.
Distance 1. In the Training menu, press p/q to select To Plan > Simple > By Distance. Simple By Time 2. Press p/q to set your distance and press to confirm. By Distance 3. A “Save to My Workout?” message appears on the screen. To save the data, press p/q to select Yes and press to confirm. 4. Enter the workout name using the onscreen keyboard. 5. Go for a ride. Press to start training and record log.
You can create a workouts based on the time and heart rate zone. 1. In the Training menu, press p/q to select To Plan > Basic. Basic Time 1:0 ' 0" Heart Rate 133~152 bpm Continue 2. Press p/q to set your time and press to confirm. 3. Press p/q to desired heart rate zone and press to confirm. 4. When finished, press p/q to select Continue and press to continue. 5. A “Save to My Workout?” message appears on the screen. To save the data, press p/q to select Yes and press to confirm. 6.
Customize Workouts You can create a customize interval workouts with your Rider 35. Customize Warm up 0:15 ' 0" Work 15.0 km Recovery 0:5 ' 0" 1. In the Training menu, press p/q to select To Plan > Customize. 2. Set the customize workout settings. 3. On the Repeat time option, press p/q to select time interval and press to confirm. 4. When finished, press p/q to select Continue and press to continue. 5. A “Save to My Workout?” message appears on the screen.
My Workout With My Workout feature, you can start your workout using the training plan that you have saved earlier. My Workout Start 1. In the Training menu, press p/q to select My Workout. 2. Press p/q to select your desired training plan and press to confirm. 3. Select Start and press Time 1.0 hr to continue. 4. Go for a ride. Press to start training and record log. Stop Training You can stop the current training after you have reached your goal, or you decide to end the current training. button.
Find & Go With the Find & Go feature, you can navigate rides from History, Planned Trip, and My POI list. 1. In the main screen, press p/q to select Find & Go Find & Go. History 2. Press to enter the Find & Go menu. Planned Trip My POI Navigate Rides from History You can navigate any trip saved in your Rider 35 history. 1. In the Find & Go menu, press p/q to select History. 2. Press p/q to select a ride from the list and press to confirm. 3. Press to record log.
You can navigate any POI saved in My POI. 1. In the Find & Go menu, press p/q to select My POI. Find & Go 2. Press p/q to select a place from the list. History 3. Press Planned Trip to start navigating the ride. My POI Stop Navigating You can stop the navigation mode at anytime. Speed k Distance m h b CAD p want you m 0.0 HR Do to stop? k m r p m To stop your ride: . 1. Press A “Do you want to stop?” message appears on the screen. 2.
Save POI You can add the current place into My POI list. Save POI 1 at 25000000 1 on 121000000 To add a POI data: 1. In the main screen, press p/q to select Save POI. 2. Press to save the current POI data. 3. Enter the POI name using the on-screen keyboard. Save View History The Rider 35 automatically saves the history as the timer starts. After you have finished a ride, you can view the history data on the Rider 35. History 06/01 15:02 To view your history: 1.
With the Stopwatch feature, you can measure the amount of time elapsed from the time the Rider 35 is activated and deactivated. You can switch between two modes: Countdown and Timer. Countdown is used to notify you when a set amount of time has passed. Timer is used to measure how long something takes. 1. In the main screen, press p/q to select Stopwatch. Stopwatch Countdown 2. Press to enter the Stopwatch menu. Timer Countdown Countdown 01:00' 00" Start 1.
Timer 1. In the Stopwatch menu, press p/q to select Timer. Timer 00:00' 00" 00 Start Timer 00:00'02"133 00:00'05"286 00:00'09"838 22 Stopwatch 2. To start the timer running, press confirm. to 3. To record a lap while the watch is running, press p/q to select Record and press to confirm. It displays the first lap time. • Repeat this step to create a new lap. 4. To stop the watch, press p/q to select Stop and press to confirm. • To reset the timer, press p/q to select Reset and press to confirm. 5.
With the Settings feature, you can customize altitude settings, display settings, sensor settings, system settings, bike and user profiles, GPS setup, and view device information. Settings Altitude 1. In the main screen, press p/q to select Settings. 2. Press to enter the Settings menu. Display Sensors User Profile Bike Profile Altitude You can set the altitude setting for the current location and the other 5 locations. Current Altitude Altitude Altitude Altitude 30 1.
Other Location Altitude Location 1 Altitude 50 Calibrate 1. In the Settings menu, press p/q to select Altitude > Location 1, Location 2, Location 3, Location 4, or Location 5. m 2. Press to confirm. 3. To set the altitude, use p/q to select Altitude and press to confirm. 4. Press p/q to adjust the desired altitude and press to confirm the setting. 5. To calibrate the set altitude, use p/q to select Calibrate and press to confirm. 6. Press to exit this menu.
screen: Power Now (current power), 3s Power (3 seconds average power), 30s Power (30 seconds average power), Max Power (maximum power), and Avg Power (average power). Find & Go / My Buddy / Altitude Display My Buddy Find & Go Altitude Speed Dist. To Point Speed Distance Speed Dist. to Peak Heart Rate Cadence Heart Rate Cadence Heart Rate Cadence My Buddy (4-grid display) Find & Go (4-grid display) Altitude (4-grid display) 1.
Sensors You can customize the respective sensor settings such as enable/disable the function or rescan the sensor for the Rider 35. Heart Rate Status: active Speed Status: inactive Cadence Status: inactive ID 0 Rescan Turn off ID 0 Rescan Turn on ID 0 Rescan Turn on Heart Rate Speed/CAD Status: inactive ID 0 Rescan Turn on Speed/Cadence Sensors Status: active ID 2408 Rescan Turn off Calibration Power 26 Settings Speed Cadence 1.
Personalize User Profile You can change your personal information. User Profile Gender Male Age 30 Height 180 cm 1. In the Settings menu, press p/q to select User Profile. 2. Press to confirm. 3. Press p/q to select the desired setting and press to confirm. • Gender: select your gender. • Age: set your age. • Height: set your height. • Weight: set your weight. • Max HR: set your maximum heart rate. • LTHR: set your lactate threshold heart rate. 4. Press to exit this menu.
View Bike Profile 1. In the Settings menu, press p/q to select Bike Profile > Overview. Bike 1 ODO 0 Ride Time 0 Alt. Gain 0 2. Press km min to confirm. 3. Press p/q to select the desired bike and press to confirm. 4. Press p/q to view more data of the selected bike. 5. Press to exit this menu. m Change System Settings You can customize the Rider 35 system settings such as backlight off, alert, time/unit data format, on-screen display language, and data reset. Backlight Off Backlight Off 1.
1. In the Settings menu, press p/q to select System > Alert. Alert On 2. Press Off 3. Press p/q to select the desired setting and press to confirm. 4. Press to confirm. to exit this menu.
1. In the Settings menu, press p/q to select System > Time/Unit > Time Zone, Daylight Save, Date format, Time format, or Unit. 2. Press to confirm. 3. Press p/q to select the desired setting/format and press 4. Press to confirm. to exit this menu. Language System Language 1. In the Settings menu, press p/q to select System > Language. English Erase data 3. Press p/q to select the desired setting and press to confirm. 2. Press 4. Press to confirm. to exit this menu.
You can view the information about the GPS signal the Rider 35 is currently receiving. GPS Status 121 . 000000 25 . 000000 Not fixed Full Power 1. In the Settings menu, press p/q to select GPS Status. 2. Press to confirm. 3. To set the signal search mode, press to confirm. 4. Press p/q to select the desired setting and press to confirm. • Off: disable the GPS satellites. • Full Power: GPS will always be on and the search for satellite signals.
Specifications Appendix Rider 35 Item Description Display 1.9” Mono LCD panel Resolution 128 x 160 Physical size 68.9 x 48 x 21 mm Weight 55.5 g Operating temperature -15oC ~ 50oC Battery Charge temperature 0oC ~ 40oC Battery 1200mAh rechargeable Li Battery Battery life Max. 35 hours usage GPS Integrated high-sensitivity SiRFstar III GPS receiver with embedded patch antenna RF transceiver 2.
ENGLISH Heart Rate Monitor Item Description Physical size 34.7 x 3.4 x 1.1 cm Weight 44 g Water Resistance 10 m Transmission range 3m Battery life 1 hour per day for 16 months (480 hours) Operating temperature 5oC ~ 40oC Radio frequency/protocol 2.4GHz / Dynastream ANT+ Sport wireless communications protocol Accuracy may be degraded by poor sensor contact, electrical interference, and receiver distance from the transmitter.
Wheel Size and Circumference The wheel size is marked on both sides of the tires. Wheel Size L (mm) Wheel Size L (mm) 12 x 1.75 935 24 x 1.75 1890 14 x 1.5 1020 24 x 2.00 1925 14 x 1.75 1055 24 x 2.125 1965 16 x 1.5 1185 26 x 7/8 1920 16 x 1.75 1195 26 x 1(59) 1913 18 x 1.5 1340 26 x 1(65) 1952 18 x 1.75 1350 26 x 1.25 1953 20 x 1.75 1515 26 x 1-1/8 1970 20 x 1-3/8 1615 26 x 1-3/8 2068 22 x 1-3/8 1770 26 x 1-1/2 2100 22 x 1-1/2 1785 26 x 1.
Zone What it does % of Heart Rate Reserve 50-60% 1: Very Light Great for beginners, those in extremely poor condition and those primarily interested in exercising for weight loss because the body burns a higher blend of fat calories than carbohydrate calories for its fuel. 60-70% 2: Light Weight management & strengthens your heart, giving it the opportunity to work at its optimum level.
