Operation Manual
Getting Started 9
ENGLISH
Step 4: Initial Setup
When turning the Rider 50 on for the rst time, the setup wizard appears on screen. Follow
the instructions to complete setup.
1. Select the display language.
2. Select the unit of measurement.
3. Enter your “user prole”.
(It is recommended to input the data. The data accuracy will highly aect your training
analysis.)
4. Read and accept the Safety Agreement.
5. Select one of the available regional maps from the list.
IMPORTANT:
You can only activate one free regional map and this process is irreversible.
Follow the on-screen instructions to activate map on the micro SD card.
NOTE:
After unplugging the Rider 50 from the USB, the Rider 50 will reset itself.•
Do not unplug the USB cable during the les transferring process. Otherwise, the les may •
be damaged or corrupted.
We highly recommend you to register the Rider 50 via Bryton Bridge. (Internet connection •
required)
After you have installed Bryton Bridge, it will automatically launch when the device is
connected to the computer. If the software does not automatically launch, double-click
Bryton Bridge shortcut icon
on the computer’s desktop.
Step 5: Acquire Satellite Signals
Once the Rider 50 is turned on, it will automatically search for satellite signals.
It may take 30 to 60 seconds to acquire signals. The GPS signal icon turns blue when GPS is
xed.
Step 6: Ride your Bike with Rider 50!
1. Just ride with free cycling mode or set up a training program through Menu options.
2. Press the Mode button to switch modes.
3. Select from the available dierent modes: Grid, Map, and My Buddy.