Operation Manual

Data Management 43
ENGLISH
Transfer Data
1. In the Knock Knock menu, use the 5-way
navigator to select Transfer Data.
2. Move the 5-way navigator up/down to
select the data items that you want to
share and press the center to conrm.
3. When nished, use the 5-way navigator to
select Knock Knock.
4. A “Ready to Knock” window appears on
the screen. Press the center of the 5-way
navigator to conrm.
5. To start transferring data, use the 5-way
navigator to highlight
and press the
center of the 5-way navigator to conrm.
NOTE: Bring both Rider 50 units within 4 m (or closer) range of each other.
Receive Data
1. In the Knock Knock menu, use the 5-way
navigator to select Receive Data.
2. A “Ready to Knock” window appears on
the screen. Press the center of the 5-way
navigator to conrm.
3. To accept receiving data from another
Rider 50 unit, use the 5-way navigator to
highlight
and press the center of
the 5-way navigator to conrm.
NOTE:
The duration of le transfer depends on the le size. It is recommended to transfer smaller •
le size on each data sharing.
When transferring or accepting the data, please keep the device with 4 m apart.•