CBRD30CP3 & BOWRD30CP INSTRUCTION MANUAL
PROLOGUE Your BSA® Illuminated sight is for use on both compound and standard bows. Each version of the BSA® illuminated sight has a specific reticle to help maintain precision on target with the actual application you are using. When you turn on the Cross Bow sight, (CBRD30C) 3, 3 MOA dots appear in the center of the site, instead of one individual dot. With ultra-fast acquisition, pin-point precision and wide field-ofview, you’ll always hit your target*.
BSA® BOW MOUNT The BSA® BOW Mount is a versatile, universal bow mount, that may be adapted to fit nearly all modern compound bows and used with any type of bow red dot sight. Please carefully read all instructions before proceeding. KIT INCLUDES: 1. Mounting plate with attached weaver style rail 2. Riser spacers (figure 2) 3. Hex head mounting bolts and washers 4. Hex head wrench 5.
BSA® BOW & CROSS BOW SIGHT Battery Cover Locking Nut Rheostat Changing Dot Intensity Elevation Adjustment Knob Windage Adjustment Knob CAUTION: DIRECT VIEWING OF THE SUN CAN CAUSE PERMANENT EYE DAMAGE. DO NOT ATTEMPT TO VIEW THE SUN WITH EITHER THIS PRODUCT OR THE NAKED EYE. NOTE: KEEP ALL INSTRUCTIONS FOR FUTURE REFERENCE.
TABLE OF CONTENTS: 1. ASSEMBLY 2. SIGHTING IN 3. FINISHING TOUCHES The BSA® 3 Red Dot Sight is designed for quick target acquisition under any light conditions. Engineered with three (3 M.O.A.) illuminated red dots and specifically calibrated at 10-yard intervals it allows for easy range adjustment. The 11 position brightness adjustment can accommodate all lighting conditions and targets. BSA® 3 Red Dot Sight operates on a standard 3 volt lithium battery (included). Replacement battery #CR2032.
1. ASSEMBLY 1a) Remove the parts from their packaging and familiarize yourself with them. (see pg. 2) 1b) The BSA® BOW Mount is meant to be attached to your bow in place of your existing sights. NOTE: Before beginning the installation process, your existing sights must be removed. The sight screw holes in the riser of your bow will be used to attach your BSA® BOW Mount . Tech Tip #1: To make sighting in easier, mark on the inside of the riser window your most commonly used pin location.
NOTE: Whether the drawstring passes through the center of the red dot sight. If the string passes to the right of center, one or more riser spacers must be used. (see pg. 2) Start with the smallest spacer, No.1, and attach the mounting plate to your bow with the spacer between it and the riser using the hex head mounting bolts and washers. Tech Tip #3: The BSA® BOW Mount is a versatile kit which may be fitted to nearly all modern bows.
1f) Loosen the hex head mounting bolts slightly and slide the mounting plate up or down until the center of the red dot sight is about where your most often used sight pin was. 1g) When finished with assembly, double check all screws for tightness. Tech Tip #4: Every red dot sight has internal windage and elevation adjustment of about 15 inches at 25 yards. However, it is best to make all the big adjustments of windage with the spacers (see pg.
six o’clock. Although the screw located at nine o’clock is marked “UP” its function in this orientation is windage. This also applies to the screw located at six o’clock. It is marked as “R” but its function in this orientation is elevation. At a safe archery range, start from a close distance (about 5 yards) and shoot two arrows into the target. If they hit within six inches of your point of aim, move back to 10 yards and try two more arrows.
caused when sliding the mount in the desired direction, the mounting plate may be flipped over. (Note that the red dot sight must also be removed and placed on the opposite side of the mounting plate.) Flipping the mounting plate will provide an additional travel of approximately one inch. 2c) Hitting left or right of point of aim. If the hit on the target is left of your point of aim, your reticle must be moved to the left of its current position.
done with your elevation adjustment screw, which is located at 6 o’clock when your bow is held in a shooting position. Rotating this screw clockwise moves the reticle up. Five clicks will move your point of impact approximately one inch at 25 yards. 2f) Hitting left or right of your point of aim. If you are hitting to the left, you must move your reticle to the left. If you are hitting to the right, you must move your dot to the right.
must be taken to not bump the sight or loosen more than one screw at a time. Otherwise, sight in adjustments may be lost. Keep manual, warranty and unused spacers in the shipping box for future reference and use. We hope that your increased understanding of the design and capabilities of the BSA® BOW mount will allow you many years of enjoyment and satisfaction. If you should have any questions, please feel free to direct them to the address and phone number listed on your warranty card.
COMPARISON CHART: MODEL BOWRD30 CBRD30CP Magnification 1X 1X Eye Relief (in) Unlimited Unlimited FOV @ 100 Yards (ft) 68 68 Tube Diameter 30mm 30mm Parallax Setting 50 Yards 50 Yards Weight (oz.) 12.24 5.94 Adjustment Graduation 1 click = 1/2” 1 click = 1/2” 45-45 45-45 Illuminated 3-3 MOA 3-3 MOA Reticle Type Red Dot Red Dot Light/Laser No No (MOA) Max.
NOTES: ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ __________
NOTES: ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ __________
CBRD30CP3 & BOWRD30CP ©2008 BSA Optics, Inc. Ft. Lauderdale, FL 33314 USA RD120508 • CBRD-BOWRD30 MANUAL04.indd Made in China - Printed in China bsaoptics.
