Specifications

32
Connector P11, 2x30 board-to-board socket connector:
Pin Signal Name Pin Signal Name Pin Signal Name
1 GND 21 GND 41 LCD_R5
2 LCD_TSPY 22 GND 42 GND
3 LCD_TSPX 23 LCD_B1 43 VCC_LCD
4 LCD_TSMY 24 LCD_B2 44 NC
5 LCD_TSMX 25 LCD_B3 45 GND
6 GND 26 LCD_B4 46 LCD_PCLK
7 NC 27 LCD_B5 47 GND
8 NC 28 GND 48 LCD_DE_M
9 GND 29 LCD_G0 49 SSP1_RXD
10 NC 30 LCD_G1 50 SSP1_FRM
11 NC 31 LCD_G2 51 SSP1_TXD
12 NC 32 LCD_G3 52 NC
13 NC 33 LCD_G4 53 SSP1_CLK
14 NC 34 LCD_G5 54 LCD_FCLK
15 GND 35 GND 55 LCD_LCLK
16 NC 36 GND 56 NC
17 LCD_RST# 37 LCD_R1 57 NC
18 NC 38 LCD_R2 58 LCD_WLED_N
19 NC 39 LCD_R3 59 LCD_WLED_P
20 VCC_LCD 40 LCD_R4 60 GND
 SSP1_RXD, SSP1_FRM, SSP1_TXD, SSP1_CLK signals are SSP interface lines used
for LCD setup. The SSP interface is described in section 4.15 – SSP.
 LCD_TS[PX/PY/MX/MY] signals are input lines of the onboard touch screen
controller.
 VCC_LCD is the LCD module power supply line at 3V / 60mA.
 GND is the EM-X270 general ground plane.
 LCD_RST# is a PXA270 GPIO_87 line used as LCD module reset.
 LCD_WLED_P and LCD_WLED_N are positive and negative terminals of the 20V /
20mA white LED driver that supplies the LCD backlight.
Connector data:
Manufacturer Mfg. P/N Mating connector
Matsushita AXK5F60547YG Matsushita, P/N: AXK6F60547YG
The connector is compatible with the TD035STEE1 LCD panel available from CompuLab.