Specifications

Connector data:

Manufacturer Mfg. P/N Mating connector

Molex 53261-0271 Molex, P/N: 51021-0200

The connector is compatible with the speaker available from CompuLab.

4.9. Keypad and General Purpose I/O (P8)

The PXA270 keypad interface is used to provide external matrix keypad connectivity.

Matrix keypads of up to 64 keys are supported. The 16 signal lines that control the keypad

interface are routed to the keypad FPC connector (P8).

Alternatively, if the keypad interface is not required, or if not all the signal lines are

utilized for keypad control, the remaining signals may be used as general purpose I/O.

Additionally, the suspend/resume signal (SUS/RES) is also routed to the keypad connector.

This allows placing the suspend/resume button on the keypad of the device.

Connector P8, 20-contacts. FPC 0.5mm:

Pin Signal Name Pin Signal Name

1 MKIN0_GPIO_100 11 MKOUT0_GPIO_103

2 MKIN1_GPIO_101 12 MKOUT1_GPIO_104

3 MKIN2_GPIO_102 13 MKOUT2_GPIO_105

4 MKIN3_GPIO_34 14 MKOUT3_GPIO_106

5 SUS/RES 15 RESERVED

6 MKIN4_GPIO_39 16 MKOUT4_GPIO_107

7 MKIN5_GPIO_99 17 MKOUT5_GPIO_108

8 MKIN6_GPIO_91 18 MKOUT6_GPIO_96

9 MKIN7_GPIO_36 19 MKOUT7_GPIO_22

10 RESERVED 20 GND

Connector data:

Manufacturer Mfg. P/N Mating connector

CVILux CF20-201D0R0 FFC, 20 cont, 0.5mm

4.10. Camera Module Connector (P36)

The "quick capture interface" of the PXA270 processor provides a connection between the

processor and a camera image sensor. The quick capture interface was designed to work

primarily with CMOS-type image sensors. However, it may be possible to connect some