User Manual
PORT-VHF-BT series
6
NO PORT8VHF-BT PORT10VHF-BT PORT12VHF-BT PORT15VHF-BT
1 USB input
2 SD card slot
3 MP3 display
4 MP3 controls
5 Input selector switch
6 Master volume control
7 Bass control
8 Treble control
9 Echo control
10 Volume control wired MIC inputs
11 Voice control (VOX) on/o switch
12 Input for wired mic 1 or guitar
13 Input for wired mic 2
14 Line level input
15 Output to a mixer or amplier
16 iPod/MP3 input connector
17 Volume control VHF mic A
18 Signal indicator channel A
19 Signal indicator channel B
20 VHF ON/OFF switch
21 VHF Power LED
22 Volume control VHF mic B
23 Bluetooth pairing LED red & blue
24 Antenna A connector
25 Bluetooth On/O/ volume control
26 Pairing button
27 Antenna B connector
28 DC power supply input
29 Power LED
30 ON/OFF switch
31 Charge indicator
32 DC Fuse compartment DC Fuse compartment DC Fuse compartment
33 Mains input
34 AC fuse compartment
PLAY MP3/WMA MUSIC
1. Switch power source to ON. The LED indicator (29) lights up in green.
2. Insert a USB stick (1) or an SD card (2) into the relevant input
3. Select USB via the MODE button (5)
4. Select a title via the or buttons and press ► (4)
PLAY LINE IN MUSIC
1. Insert an RCA plug into the LINE IN sockets (14)
2. If LINE is not displayed by default, press the MODE button (5) until LINE is displayed.
3. If you want to sing along to the music, insert a wired microphone into MIC INPUT (12 or 13) or switch on the
wireless mic function (20) and the switch on the wireless microphone. Set the volume of the wired mic via
the MIC VOL control (10). Set the volume of the wireless mic via the button (17 or 22 (only PORT10&12VHF-
BT))
4. Adjust the volume control (6) of the line source.