advanced_phone_user_guide

Call control settings
24
• International – All calls from
International numbers must
announce their name. All other calls
come straight through, except those
already on the block list, who will
hear the message above.
• Ans Phone – All calls not in your
Contacts, Allowed or VIP list are
sent straight to the Answer Phone
including those on your Blocked list.
• Custom – You choose how you’d
like to handle all of your calls.
In Announce mode (default setting),
the Advanced Phone will lter all
rst time calls from numbers that
are not yet saved in your Contacts,
or already on your allowed list. By
doing this, you gradually build up
these lists and your phone will know
how to deal with the call the next
time it comes in.
Switch BT Call Blocking on/o
When Call Blocking is set to On, it is
On for whichever mode you’re using
(e.g Announce mode). If you turn
Call Blocking O, all calls will be
allowed through, even if they are
already on your blocked list.
1. In idle mode, press
.
2. Call Blocking settings are PIN
protected, so follow the instructions
to set your PIN or enter your PIN
and select OK.
3. BT Call Blocking is highlighted,
press Select or
.
4. Blocking settings is highlighted,
press Select or
.
5. Press Left or Right to switch BT
Call Blocking on/o, then press Save.
Personalise your
announce message
You can personalise the BT Call
Blocking greeting, by adding your
name to the Announce message.
1. Press
button.
2. Follow the instructions to set your
PIN or enter your PIN and select OK.
3. BT Call Blocking is highlighted,
press Select or
.
4. Scroll to Announce msg, press
Select or .
5. Press Select, or
, on Record
name and follow the voice prompt
and press Save.
6. The recording will play back, if
you’re happy with it, press
.