advanced_phone_user_guide

Call control settings
28
5. Scroll down using the button
to Area codes, press Select or
.
6. On rst use, you will see No area
codes stored. Add code? Select Yes.
7. Add the area code (e.g. 01473)
and press Save.
To add a number to the allow list
or to unblock a number
1. In idle mode, press
.
2. Follow the instructions to set your
PIN or enter your PIN and select
.
3. BT Call Blocking is highlighted,
press Select or
.
4. Scroll down using the
button
to Allow numbers and press Select
or
.
5. Add number is highlighted, press
Select or
.
6. Enter the telephone number you
want to allow (make sure you enter
the full dialling code) and press Save.
Deleting your blocked and
allowed lists
When in the Block and Allow
number menu’s above, you also have
the choice to delete the whole list.
Remember, if you do this, all calls
previously blocked and allowed, will
now come back through your BT Call
through, you can also add numbers
directly to the lists via your Call
Control menu.
To add a number to the block list
1. In idle mode, press
.
2. Follow the instructions to set your
PIN or enter your PIN and select
.
3. BT Call Blocking is highlighted,
press Select or
.
4. Scroll down using the
button
to Block numbers and press Select
or
.
5. Add number is highlighted, press
Select or
.
6. Enter the telephone number
you want to block (make sure you
enter the full dialling code) and
press Save.
Tip
When storing international numbers,
replace + with 00, then enter the
rest of the number.
To block numbers by area code
You can also block numbers by area
code. This will mean that any calls
beginning with that code, will be
blocked. Follow the instructions
above from 1 to 4 and then: