advanced_phone_user_guide

Call control settings
30
the same procedure for each option
displayed and then select OK. The
display will show Outgoing calls
settings saved. You will then be
prompted to add some VIPs if you
haven’t already assigned any.
Tip
You can set some of your contacts to
be VIPs, so that they can always get
through when BT Call Blocking or Do
Not Disturb is switched on.
Assign VIP status to a contact
1. In idle mode, press
.
2. Enter the access PIN and select
OK. Press
to highlight VIP list
and press Select.
3. Read the prompt and select Info,
read the message and select Yes at
the end. Your contacts list will be
displayed.
4. To assign contacts as VIP,
highlight the contact and press OK.
Select additional contacts if required
by repeating above.
5. Select Options, Add selected will
be highlighted, press OK and the
selected entries will be added to
your VIP list.
If you’ve already added contacts to
your VIP’s, the list will be displayed
when you enter the VIP list menu.
You can then select Options to add
further VIPs, remove VIPs or assign a
VIP ringtone.