advanced_phone_user_guide

Answer machine
42
to read it all, then select Set PIN.
5. Enter a 4 digit PIN of your choice
and select OK.
6. Enter the 4 digit PIN again to
conrm and select OK. The display
will show Access PIN saved.
Tip
The Remote Access PIN is also used
for the Call Control PIN. You cannot
turn Remote access On until you
have set a remote access PIN. The
default setting is O.
Change the remote access PIN
1. Select Menu, Answer Phone is
displayed, press Select.
2. Press
until Settings is
displayed, press Select.
3. Press
to highlight Remote
access and press Select.
4. Press
to highlight Change
PIN and press Select. You will be
reminded that the access PIN is
used for both remote access and
call control.
5. Enter your old 4 digit PIN and
select OK.
6. Enter the new 4 digit PIN, select
OK, then enter the new PIN again
and select OK. The display will show
New Access PIN saved.
Important
Remote Access must rst
be enabled to allow you to
switch on the answer
machine remotely.
Turn remote access on or o
1. Select Menu, Answer Phone is
displayed, press Select.
2. Press
until Settings is
displayed, press Select.
3. Press
to highlight Remote
access and press Select.
4. On/O is displayed, press Select.
5. Press Left or Right to display
On or O and select Save. Saved will
be displayed.
If you forget to switch on your
answer machine
1. Call your number from another
phone and let it ring. After 20 rings
the machine will switch on and
answer your call.
2. Press
*
and enter your 4 digit
remote access PIN when prompted.
Play back your messages as shown
on page 43 in, ‘Operating your