advanced_phone_user_guide

Quick set-up guide
7
If you need some help, call us on 0800 145 6789 or go to bt.com/producthelp
Set up for additional handsets
(multipacks only)
1. For additional handsets and
chargers: plug the mains power
adaptor into the back of the charger
and plug the other end into the mains
wall socket and switch on the power.
2. Activate the batteries as
explained on page 5. If you set the
time and date on the rst handset
then it will be shared with all other
handsets in your multi pack once
you activate the batteries.
3. Place the handset on the charger
to charge for 16 hours.
Using your Advanced Phone
on a line with broadband?
To avoid problems with your
broadband or noise on your
phone line, you might need to
plug your telephone line cord
into the wall socket via a
microlter (not supplied).
If your main phone socket has
a single socket, you do need
to use microlters, like this:
You’ll need a microlter for
every phone socket where
you’ve got equipment
plugged in – up to a
maximum of four per line –
including alarm sytems and
digital TV boxes.
You can get BT ADSL micro
lters from bt.com/shop
You don’t need to use
microlters if your main
phone socket has two
separate sockets, like these:
Tip
If you need to take the batteries out,
slide the battery cover down, then
gently take the batteries out.
ITEM CODE: 090638
Advanced Phone Twin