8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 1 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 2 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Section Welcome… to your BT Baby Monitor 150 TM • Digital sound quality with high definition sound (Hi-dS ) lets you hear your baby breathe, gurgle, snuffle or cry with complete clarity. • Wireless range of up to 300m outdoors and up to 50m indoors (in ideal conditions) - giving you the freedom to move around with clear reception and no interference from other baby monitors.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 3 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796 Section This User Guide provides you with all the information you need to get the most from your BT Baby Monitor 150. Please read this guide carefully and keep it for future reference.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 4 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 4 In this guide Setting up Parent unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Baby unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Check the connection . . . . . . . . . . . . . . . . . . 7 Getting to know your Baby Monitor Parent unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Baby unit . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 5 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Setting up 5 Parent unit 1. Plug the mains power cable into the socket marked back of the Parent unit charger. on the 2. Remove the battery compartment cover and insert the 2 x AA rechargeable batteries into the battery compartment on the Parent unit and replace the battery compartment cover as shown. You should always ensure you have inserted batteries in the Parent unit.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 6 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 6 Setting up Running rechargeable batteries right down at least once a week will help them last as long as possible. The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the performance time of the Parent unit. Eventually they will need to be replaced. New batteries can be obtained from the BT Baby Monitor Helpline 0808 100 6554*.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 7 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796 Setting up 3. Replace the battery cover, turning the battery lock into the vertical position again to lock it. Check the connection However, the features on your BT Baby Monitor 150 have been designed to work normally at any temperature between 0oC and 40oC. When both Units are switched on, the green link lights on both Units will come on.
657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 8 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 8 Getting to know your Baby Monitor Parent unit From the Parent unit you can listen to your baby and operate the Baby unit by remote control. Display Power saving backlight switches off 15 seconds after last button push. Talk (on side of unit) Press to talk to your baby. Up Increase speaker volume. Scroll up through menu options. Menu Press to open the menu. Press and hold to exit the menu.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 9 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796 Getting to know your Baby Monitor Parent unit display icons s. Speaker is switched off. Nightlight is on. Sound alert is on. Lullaby is playing. Full battery Temperature is within normal levels. Mid charge Timer is on. Low charge Vibrate alert is on. Empty Scrolling bars when charging.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 10 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 10 Getting to know your Baby Monitor Parent unit charger Front Charging light Indicates parent unit is charging. Back Power socket For connection to mains power.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 11 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796 Getting to know your Baby Monitor Baby unit Page Press to page the Parent unit – useful for finding when it is misplaced. Brightness Press to adjust the nightlight brightness (once nightlight is switched on). There are three levels. Nightlight Press to switch nightlight on or off. Up/Register Increase speaker volume.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 12 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 12 Getting to know your Baby Monitor Back of Baby unit Temperature sensor Power socket For connection to mains power. Underside Auxiliary input socket Use to plug in an external audio source, e.g. MP3 player so you can play your own choice of music to baby. Battery lock Child tamper proof lock for the battery compartment. Battery lock Child tamper proof lock for the battery compartment.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 13 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796 Getting to know your Baby Monitor Baby unit display icons Battery full (icon not displayed when using mains power). Battery half full. Battery low. Displayed when the nightlight is on. Displayed when a lullaby is being played. On when the temperature is normal. Flashing when it is too hot or too cold for baby.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 14 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 14 Using your BT Baby Monitor 150 Helpline If you have any problems using your BT Baby Monitor 150, call 0808 100 6554*. Switching on/off Switch on the Parent unit 1. Press and hold . The Link LED on the far left will illuminate. Keep pressing the button until the 3 LEDs to the far right illuminate as well.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 15 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796 Using your BT Baby Monitor 150 Adjust speaker volume There are 5 volume levels (and off) on the Parent unit. The volume level is shown on the display bars, e.g. level 3 is shown g g g c c . 1. Press or . The volume level is displayed.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 16 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 16 Using your BT Baby Monitor 150 Paging You can use the button on the Baby unit to find the Parent unit. This will also reset the speaker volume level, in case it has been switched off. 1. Press on the Baby unit. If the Parent unit volume was set to off, this will automatically reset the volume to the default volume. The paging alert will sound. 2.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 17 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796 Using your BT Baby Monitor 150 Torch 1. Press and hold to switch the torch on. Press to switch off. Nightlight Set a comforting nightlight with a choice of three brightness levels. At the Baby unit 1. On the Baby unit, press 2. Press to switch the nightlight On or Off. repeatedly to select the brightness settings.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 18 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 18 Using your BT Baby Monitor 150 Pre-set temperature alert range The Baby unit comes with pre-set minimum and maximum temperatures, so if the temperature falls below or goes above the setting an alert will sound and the display will also show High or Low as appropriate. Default is 14˚C min. and 23˚C max. You can adjust the minimum / maximum setting.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 19 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796 Using your BT Baby Monitor 150 Switch temperature alert on or off 1. Press scroll to Temperature. Press 2. Alert on/off is displayed, press . . 3. The current available option will be displayed, either Alert on? or Alert off? Press to select the option displayed. 4. Press to return to the standby display.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 20 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 20 Using your BT Baby Monitor 150 If you set the sensitivity level too low, only louder sounds in the baby’s room will be picked up and communicated back to you via the Parent unit. The Unit will not pick up quieter background noises. The default sensitivity setting is Level 5 – the microphone is permanently on. Select sensitivity level 1. Press scroll to Sensitivity. Press 2.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 21 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796 Using your BT Baby Monitor 150 Lullaby The Baby unit plays lullabies to gently soothe your baby back to sleep. Each lullaby is played repeatedly for 15 minutes. Select one of the five melodies or select Play All for a medley of all 5 lullabies for 15 minutes. You can also record your own lullaby or story lasting up to 2 minutes.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 22 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 22 Using your BT Baby Monitor 150 Scroll to Select New and press . Scroll Lullaby 1-5, Own, Aux or Play All and press or to . During playback: Pause - Press Resume - Press Stop - Press to stop playback for up to 60 seconds. to resume a paused lullaby. on the baby unit to stop playback. Stop lullaby 1. When a lullaby is playing, press Stop Lullaby?. 2. Press .
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 23 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796 Using your BT Baby Monitor 150 Delete a recorded lullaby 1. Press and hold 2. Release . After 2 seconds the displays shows Deleted. . Connect an auxiliary player Plug another player into your Baby unit, to play songs or stories. At the Baby unit: 1. Plug your player to the auxiliary input socket on the back of the Baby unit. 2.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 24 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 24 Using your BT Baby Monitor 150 3. Timer On? is displayed. Press and press . to select Set Time? 4. Press Press or or to set the number of hours. Press . to set the number of minutes. Press . 5. Press to return to the previous menu level. Start countdown timer 1. Press scroll to Timer. Press 2. Display shows Countdown. Press 3. Display shows Timer On. Press . . .
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 25 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796 Using your BT Baby Monitor 150 Set count up timer 1. Press scroll to Timer. Press 2. Scroll to Count up. Press 3. Timer On is displayed. Press 4. Press The timer can be set to count up from 1 second to 99 hours 59 minutes. . The icon is displayed along with the count up time. . . to start the count up timer.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 26 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 26 Using your BT Baby Monitor 150 Set clock This sets the clock on both units. 1. Press scroll to Timer. Press 2. Scroll to Clock and press 3. Set Time is displayed. Press . . . 4. Press or to set the hour then press 5. Press or to set the minute then press 6. Press to return to the previous menu level. . . Set 12 or 24 hour format 1. Press scroll to Timer. Press 2.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 27 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796 Using your BT Baby Monitor 150 Reset You can restore all the adjustable settings back to their original factory settings. The Parent and Baby units are reset individually. 1. Press to switch the unit off. 2. Press again to switch the unit back on. 3. While the unit is switching on, press and hold until you hear a beep.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 28 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 28 Help Helpline If you have any problems using your BT Baby Monitor 150, call 0808 100 6554*. Link light does not come on • Check that both the Baby and Parent units are switched on. • If using batteries check that they are correctly installed and that they are not drained.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 29 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796 Help Link light is red • The link between your Units is broken. You will also hear an alert to let you know there is no communication between the Units. If this happens, check that the mains power (or batteries) is correctly connected and that the Units are within range of one another.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 30 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 30 General information Cleaning Within the 12 month guarantee period Both Units have splash resistant grilles and casing. To clean, wipe with a damp cloth. If you experience difficulty using the product, prior to returning your product, please read the Help section beginning on page 28, or contact the BT Baby Monitor Helpline for assistance on 0808 100 6554*.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 31 BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796 Baby Monitor 150 VTECH – Issue 1 – 21.05.08 – 8796 General information Product disposal instructions for residential users When you have no further use for it, please remove any batteries and dispose of them and the product as per your local authority’s recycling processes. For more information please contact your local authority or the retailer where the product was purchased.
8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 Offices worldwide The services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of any contract. © British Telecommunications plc 2008. Registered Office: 81 Newgate Street, London EC1A 7AJ. Registered in England No. 1800000.
