Service manual

ManualsBrandsBT ManualsCordless Telephone3000 Executive

Section - IV Software BT3000 PLUS Rev.0, Soft Ver. 8 Page 9 of 15

Incorrect identifier in the

SET command.

a) The text SET BEGIN or SET END not written.

b) A different value from ANALYSEDATA

transferred as <Group name> for the SET

command.

15 Damaged exit file Hard disk error. Contact sales/service.

16 SET command not closed The SET END not inserted in the script.

17 Too many SET commands More than one SET BEGIN command inserted.

18 SET command not found The SET BEGIN command not found in the script.

Incorrect variable for SET

command

A different value from ANALYSEDATA transferred

as <Group name> for the SET command.

Variable not found before

the SET command

The highlighted variable required in the script before

the SET BEGIN command.

The variable must be String

type

The highlighted variable must be String type, not

Char

TABEL 1 – TRANSMISSION

The following variables are used for the transmission of a report from analyzer to the host

computer:

Variable Usage Type of valid data

PATIENTCODE

PATIENTNAME

PATIENTSURNAME

PATIENTGROUP

PATIENTLISTTYPE

PATIENTTYPE

PATIENTNOTE

PATIENTNUMBERTEST

CHECKSUM

ANALYSESCODE

ANALYSENAME

ANALYSESTYPE

ANALYSESCONCENTRATION1

ANALYSESCONCENTRATION2

ANALYSESFLAGS1

ANALYSESFLAGS2

ANALYSESMINVALUE

ANALYSESMAXVALUE

ANALYSESUM1

ANALYSESUM2

ANALYSESUMFACTOR

ANALYSES2RESULT

ANALYSESSERUMTYPE

ANALYSESURINE24H

Patient Code

Patient Name

Patient Surname

Group

(1)

List

(2)

Method Type

(3)

Descriptive Note

Number of Results

Check-Sum

Analysis Code

Analysis name

Analysis Type

(4)

1st Concentration

2nd Concentration

Flag 1st Result

Flag 2nd Result

Minimum Value

Maximum Value

1st Unit of Measurement

2nd unit of measurement

Unit Factor

Does the 2nd result exists?

(5)

Method Type

(3)

Urine in 24/h

String

String Character

String

String Character

String

String Character

String

String Character

String

(1)

Identifies Male, Female or Child (Select one of these):

‘M’ : Male

‘F’ : Female

‘C’ : Child

(2)

Identifies Routine or STAT (Select one of these):

‘R’ : Routine

‘S’ : STAT

Transmitting patient from archive will always have identifier of Routine.

(3)

Identifies Serum or Urine (Select one of these):

‘S’ : Serum

‘U’ : Urine