* CONTENT S* 01. CONTENTS D 02.SAFETY RULES / FOREWOR 03. WARRANTY CYLINDER INSTALLATION / 04. BARREL INSTALLATION / AIR PAINTBALLS DER INSTALLATION / LOADING VELOCITY ADJUSTMET / LOA / OVING AIR SUPPLY / CLEANING 05. STORAGE / UNLOADING / REM PING DISSASSEMBLY & FIELD STRIPP IPPPING CONT’D 06. DISASSEMBLY & FIELD STR & TRANSPORTATION 07. REASSEMBLY / STORAGE ORSE 08. S.W.A.T. / BANSHEE / IRONH 09. PARTS LIST 10.
* READ OWNERS MANUAL Rules of Safe Marker Handling BEFORE USING.* BT Paintball Designs, Inc. Model BT-4TM No part of this docume nt may be copied or rep 1. Treat every marker as if it were loaded. roduced without the pri consent of BT Paintba or written ll Designs, Inc. . marker ll 2. Never look down the barrel of a paintba shoot. to 3. Keep your finger off the trigger until ready Congratulations on yo ur selection of the BT TM -4 paintball marker. 4.
B GNS, INC. BT PAINTBALL DESI LIMITED WARRANTY marker. This r workmanship of this d/o an ial ter ma in t fec e for the original due to de original date of purchas ely and on file ent of any original part the em ing lac rep low fol the or nts lab rra for let s NS, INC. wa and twelve (12) month manual is filled in comp BT PAINTBALL DESIG (12) months for parts card included with this e ion elv tw rat ist for t reg ec nty eff in rra wa be ed only if the warranty will UPS C.O.D.
BT PAINTBALL DESIGNS NOTE: Eye protective devices designed specifically for paintball use must be worn by the operator and anyone within range. Read this entire manual before loading, attaching a propellant source or in any way attempting to operate the BT-4TM. Barrel Installation Velocity Adjustment Loader Installation 1. Make sure marker is degassed, hopper removed, no paintballs in the feed port or breech and the safety is set to “safe”. 2.
BT PAINTBALL DESIGNS Disassembly and Field Stripping Proper Storage of the Marker When you are finished using the BT-4™ it is important that you prepare the marker for storage. This will not only serve to increase the life of the marker, but will assure opti- /!\ WARNING: Any assembly/ disassembly of any paintball marker should be performed by a qualified service technician. mum performance on your next outing. Unloading 1.
BATTLE TESTED Rear Notch Sight Removal/Relocation The rear notch sight may be removed or may be relocated along the upper picatinny rail as needed. To remove or adjust location: Note: If relocating, make sure marker is pointed in a safe direction, barrel blocking device is installed and safety is set to safe. 1. Using a 1/8" hex wrench loosen the rear sight retaining screw. 2. Slide rear sight to preferred location or remove if so desired. 3. Reverse process to replace rear sight.
The S.W.A.T. Includes: • Magazine Expansion Chamber (01) • Collapsible “CAR” Stock (06) The Banshee Includes: • BT-47 Barrel (02) • Magazine Expansion Chamber (01) • Combat Stock (05) TM The Ironhorse Includes: • BT-M16 Apex Barrel (03) • Bi-Pod (04) • Collapsible “CAR” Stock (06) TM TM 07 BT L L A B T PAIN S N G I DES BATTLE TESTED (01) Magazine Expansion Chamber Not only does this add the look and feel of an M-16/M-4 magazine, it serves as an expansion chamber.
Reassembly S.W.A.T. 06 01 To reassemble the marker, reverse the Disassembly instructions starting with the barrel adapter, ball retainer and bolt removal. While reassembling the marker, you should oil all O-rings and sliding parts. All parts and o-rings returned to the marker should be free of debris and visual nicks and scratches which can alter the performance of the marker. All screws returned to the marker must be tightened so there is no chance of them vibrating loose. Storage and Transportation 1.
TM BT-4 MARKER SERIES Parts List ITEM NO. QTY.
BT-4 MARKER SERIES Parts List Diagram TM BATTLE TESTED 10
This is not a toy. Misuse may cause serious injury or death. Eye protection de signed specifically for paintball must be worn by the user and persons within range. Recommen d 18 years of age or older to purchase. Perso ns under 18 years of age must have adult supervision. READ THIS MANUAL BEFORE USING.
