User guide

Load up to Make sure
10 envelopes • The print side is facing you and the paper guide is
adjusted against theside of the envelopes.
• The stamp location is in the upper left corner.
• The envelopes are loaded vertically against the righ side of the rear input tray.
10 greeting cards, • The print side is facing you and the paper guide is adjusted against the side of the cards.
index cards, post- • The cards are loaded vertically against the right side of the sheet feeder.
cards, or photo cards
25 sheets of photo
• The glossy or coated side is facing you.
paper or photocards • The paper guide is against the side of the paper.
20 sheets of • Place the banner paper behind the printer.
banner paper Then bring the unattached edge of the first page over the
Note: Make sure you select printer and into the sheet feeder.
Banner or A4 Banner paper • The paper guide is against the side of the paper.
size in the Printer Properties
10 transparencies • The rough side of the transparency is facing you.
• The paper guide is against the edge of the transparencies.
100 sheets of • The print side is facing you and the paper guide is against the side of the paper.
custom-sized paper • Your paper size fits within these dimensions:
- Width: 3.0 in. to 8.5 in. (76 mm to 215.9 mm)
- Length: 5.0 in. to 17.0 in. (127 mm to 432 mm)
25 iron-on transfers • You load the iron-on transfers following the instructions on the package.
• The paper guide is against the side of the iron-on transfers
• Your BT MultiJet 3000 automatically prints a mirror image.
Paper/Envelope options