Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 E A S IC R E H P RC 15 ATU U 0 E P T E2 YF U S ERS O P R K . M U NV ID C WO O Y CO AP O A R T R FO This product is intended for connection to analogue public switched telephone networks and private switchboards in the United Kingdom.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Please open this page for an ‘At a glance’ guide to your Converse 2015
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 At a glance Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 One touch memory buttons (M1-M8) Each button dials a stored name and number with just one press. In use phone light PIC socket M5 M1 M2 M6 In use data light M3 Used to access some BT Select Services and when using your phone with a switchboard.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 In this guide Note Please note that there is a detailed Index at the back of this guide, see page 25.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Key features 2 line capacity Enables two lines to be connected, one for phone calls and one exclusively for Internet and data use. Secrecy Prevents a caller from hearing you speak to someone else close by. Message waiting indicator One-touch buttons Provides one-touch dialling for 8 phone numbers. Handsfree Handsfree puts calls on the loudspeaker, leaving you free to take notes and for others in the room to hear and take part in the call.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Introduction Your Converse 2015 has been designed for ease of use and made to the high standards set by BT. Please read the instructions carefully before use and keep this user guide for future reference. For your records Date of purchase: Unpacking your Converse 2015 If anything is missing, please contact your place of purchase immediately.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Safety information General Do not open the Converse 2015. This could expose you to high voltages or other risks. Contact the Helpline for all repairs. Cleaning Simply clean your Converse 2015 with a damp (not wet) cloth, or an antistatic wipe. Never use household polish as this may damage the product. INTRODUCTION Never use a dry cloth as this may cause static shock. Environmental Do not expose to direct sunlight.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Setting up Plan the location 2 Plug your Converse 2015 into the telephone sockets Situate your Converse 2015 close enough to a phone socket so that the line cord will reach. Your Converse 2015 can be wall-mounted. See ‘Wall-mounting’, on page 22.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 If connecting two telephone line cords: Set the switch to Line 2. The line cord connected to Line 1 is used for calls. The line cord connected to Line 2 for data communications and the data port is automatically linked to Line 2. 5 Desk mounting If preferred, you can attach the desk/wall mount to the base of your phone to raise it up at a convenient angle.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Using your Converse 2015 Making and receiving calls To answer a call When the phone rings To make a call Pick up the handset. Pick up the handset. ndsfree Ha Or Or ndsfree Ha Press the Handsfree button. Press the Handsfree button. USING YOUR PHONE Dial the number. To redial the last number To dial a number under a one-touch button (M1-M8) Pick up the handset. ndsfree Ha Pick up the handset. Or ndsfree Ha Press the Handsfree button.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Hold Handsfree To place a call on hold During a conversation: ld Ho Press the Hold button. The display shows HOLD and the Line light flashes. Handsfree allows you to talk to your caller without holding the handset and enables other people in the room to take part in your conversation. To use handsfree During a call, or to make a call: The call is now on hold. ndsfree Ha ndsfree Ha Press the Handsfree button to speak to your caller again.
Using the one-touch memory Se Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 cy cre To store a name and number in the one-touch memory Enter the name you want using the letters on the keypad. This lets you store entries in the one touch memory under the M1-M8 buttons. For example to enter the name ANNE: AB C 2 Press and hold the # button and whilst still holding the # button lift the handset. 6 The display will show PROGRAM MODE. 6 Release the # button. The display will show NO PIC.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 To store a pause When dialling a number, you can enter a pause between the digits. For example you may need to allow time for the phone to pick up an outside line before calling the number you want. Each time you press the Pause button a 2.5-second pause is inserted into the number you are dialling.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Using the Converse 2015 PIC The PIC (Programmable Input Chip) is used to copy names and numbers stored in the one-touch memories to other Converse 2015 telephones. Note The PIC is available separately from your Converse 2015 supplier. When you have a PIC inserted in the socket you will not be able to make or receive calls. PIC program controls Buttons on your Converse 2015 let you control functions on the PIC.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 To access the Program Mode Insert the PIC into the socket on the top of the Converse 2015. IMPORTANT If you make a mistake entering the 4-digit PIN, try again. You can try three times. If you still do not enter the correct PIN you should replace the handset and start again. To view the Read PIC Memory Press and hold down the # button and lift the handset. Display shows PROGRAM MODE.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Enter the name you want. (For details, see “To store a name and number in the one-touch memory”, page 11). This lets you store name and number entries on the PIC ready for transferring to other Converse 2015s. Se To use Program PIC Memory cy cre ld Ho When the display shows PROGRAM MODE (see page 14). Se ld Ho Press and release the Hold button until the display shows PROG PIC MEM. cy cre Press the Secrecy button.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 To use Write to PIC This lets you copy the entries from a Converse 2015 into the PIC. Note When you transfer the memory, any entries currently stored in the PIC will be overwritten. When the display shows PROGRAM MODE (see page 14). Se USING YOUR PIC ld Ho cy cre Se Redial cy cre Once your PIC contains the entries you want, it is easy to transfer them to any number of Converse 2015s. It takes just 5 seconds to transfer the memory.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 PIC additional functions To delete the phone’s memory To delete the PIC memory M4 Redial GH I 4 ndsfree Ha Insert the PIC into the PIC socket on the Converse 2015. Press and hold the M4, Redial and 4 buttons. Now press the Handsfree button. The display shows ERASE PIC MODE. Release the buttons. Press the Handsfree button when prompted by the display and remove the now blank PIC.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 To perform the PIC read write test/ To test your PIC R Insert the PIC into the PIC socket on the Converse 2015. JK Press and hold the M3, R, and 5 buttons. M3 L 5 ndsfree Ha Now press the Handsfree button. The display shows PIC RW TEST MODE. Release the buttons. USING YOUR PIC The phone copies entries to the PIC memory, reads them back and then erases them from the PIC. If the PIC is OK, the display shows PASS PIC RW TEST.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 General information Guarantee Your Converse 2015 is guaranteed for a period of 12 months from the date of purchase. If you experience difficulty using the product, prior to returning your product, please read the ‘Help’ section beginning on page 21, or contact the BT Converse 2015 Helpline for assistance: 0845 050 1331, 9am to 5.30pm, Monday to Friday.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Technical information How many phones can you have? All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to calculate the number of items which may be connected to any one telephone line. The Converse 2015 has a REN of 1. Any other instrument provided by BT may be assumed to have a REN of 1 unless otherwise stated. A total REN of 4 is allowed.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Help Emergency calls The emergency services can be contacted in the UK by dialling 999 or 112 which is valid in any country that is a member of the European community. No dial tone. The phone will not dial out Are the telephone line cords plugged into the phone sockets? HELP You cannot hear the phone ring Check the ringer volume switch at the rear of the base. If necessary set the volume to Hi.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Wall mounting 6 Note Before you wall-mount your Converse 2015 check that you are not drilling into any hidden wiring Use the template provided to mark the positions for drilling the two holes. 2 Drill the two holes using an 8mm drill bit. WALL MOUNTING 1 Wall plug Wall 22 Attach the wall mount to the base by first inserting the hook then pressing in the clips until they lock into place. If desk mounted, please see page 8.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Wall mounting template Cut out this page and place the template on the wall. 86mm The location of the screws is indicated by the centres of the crossed lines.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 24
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Index Answer a call 9 1 9 9 10 10 9 9 9 10 6 12 8 9 19 7 10 21 8 10 1-2 7 7 9 9 12 9 11 12 12 Pause PIC access program mode delete memory fast transfer to phone program controls program mode program PIC memory read PIC memory write to phone write to PIC PIC additional functions delete PIC memory delete phone memory test PIC Redial Returning product Ringer volume Safety information Secrecy Setting up Switchboard compatibility Telephone socket Telepho
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 26
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Declaration of Conformity Application of Council Directive(s): 1999/5/EC Standard(s) to which Conformity is Declared: EN60950:1992 INC. AMENDMENTS A1:1993, A2:1993, A3:1995, A4:1997, A11:1997 EN55022:1998, EN55024:1998 Name of manufacturer: Kingtronics Industrial Co., Ltd. Century Centre 44-46 Hung To Road Kwun Tong Kowloon Hong Kong Type of Equipment: Basic Corded Telephone Model No.
Converse 2015 ~ 4th Edition ~ 10th September ’02 ~ 4517 Offices worldwide The Telecommunications services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of any contract. TouchtoneTM is a registered trade mark of British Telecommunications plc in the UK. © British Telecommunications plc 2002.
