UK’s best selling phone brand* User Guide BT Decor 2200 Corded Phone
This User Guide provides you with all the information you need to get the most from your phone. Before you make your first call you will need to set up your phone. Follow the simple instructions in ‘Getting started’, on the next few pages.
In this guide Getting started Directory Location 5 Store a name and number in the directory 10 Activate the batteries 5 View/dial an entry in the directory 10 Connect to the telephone line 5 Insert a pause in a number 10 Getting to know your phone 6 Edit an entry in the directory 11 Delete a directory entry 11 11 Using your phone Make a call 7 Delete the entire directory Call timer 7 Caller Display and the calls list Preparatory dialling 7 Calls list 12 End a call 7 New ca
Ringer volume 16 Ringer tone 16 Set the display time and date 17 Set the time format 17 Display contrast 18 General information Safety 19 Cleaning 19 Product disposal instructions 19 Guarantee 20 Technical information 20 How many telephones can I have? 20 Switchboard compatibility 20 Switchboard external line access code 21 To insert a pause 21 Recall 21 R&TTE Directive 21 Declaration of Conformance 21 User Guide formats 21 If you need some help, call us on 0800 145 678
Getting started Location You need to place your BT Decor 2200 within 3 metres of a telephone line socket so that the cable will reach. Activate the batteries Battery low warning 1. Activate the batteries by pulling the plastic tab away from the underside of the phone. When the batteries are low and in need of replacing the display will show the battery low icon .
Getting to know your phone Menu Press to access the Settings menu. 3 Line display In standby, displays the date and time. Calls light Red light flashes to indicate an incoming call. Directory Use to store and dial directory entries. When viewing the Calls list or directory, press to access the sub menu list. AM PM NEW 07900 124456 R (Recall) Used with switchboard services and certain BT Calling Features.
Using your phone Making and receiving calls Make a call 1. Lift the handset and wait for the dial tone (or press the button). When the handset is off the hook or Handsfree is in use the display will show the icon. 2. Enter the telephone number. Call timer Your phone automatically times the duration of every call. The timer will activate 5 seconds into an outgoing call and will continue to display the time until 5 seconds after the call has ended.
Handsfree Handsfree mode lets you talk to your caller without holding the handset. It also allows other people in the room to listen to your conversation over the loudspeaker. The green LED on the button will illuminate when handsfree mode is in use and the icon will be displayed on the screen. Make a call in handsfree mode 1. Press the to be dialled. button and then enter the telephone number Answer a call in handsfree mode 1. When the phone rings, press the button to answer the call.
If a redial number is longer than 15 digits, the first 15 digits will be displayed for about 3 seconds and then the screen will scroll to display the remaining digits. After 3 seconds the screen reverts back and continues to scroll back and forth until you change the display information. Call the last number dialled 1. Lift the handset or press the button, then press the button. The last number called will be redialled. Save the redial number to the directory 1. Press the button.
Directory You can store 50 names and telephone numbers in the directory. Each name stored can be up to 15 characters and each number up to 24 digits. Directory entries are stored alphabetically. Store a name and number in the directory 1. Press the Numbers stored without a name will be displayed before alphabetical entries. Press and hold to exit the directory and return to standby at any time. Directory full button.
Edit an entry in the directory 1. Press the button, then use the scroll to the entry you want. 2. Press the 3. Press or buttons to button. Add New Entry is displayed. to scroll to Edit Entry and press . 4. The name will be displayed. Use the button to delete and the keypad to enter new characters. When the name is correct, press . 5. The number is displayed. Use the button to delete and the keypad to enter new digits. When the number is correct, press . 6.
Caller Display and the Calls list If you have subscribed to a Caller Display service, you will be able to see your caller’s number on the display (provided it is not withheld) prior to answering the call. If the caller’s name matches an entry you’ve stored in the directory, you will also see the caller’s name on the display. Calls list The Calls list holds the telephone numbers (and names if there is a match with the directory) of the last 30 received calls.
Copy a number in the Calls list to the directory 1. Press the 2. Press button to view the list. or 3. Press the press . to scroll to the entry you want. button. Save Number will be displayed, 4. Use the keypad to enter a name and press . 5. Use the keypad to edit the number if necessary and then press . Entry Saved is displayed. For help with entering names, see page 10. Use to delete incorrect digits. Delete an entry in the Calls list 1. Press the 2. Press 3. Press the 4.
1571 Voice mail indication If you have subscribed to BT Answer 1571 or Call Minder, your BT Decor 2200 will indicate when you have received a voice message by the flashing messages light. BT Answer 1571 and Call Minder are invisible answer machines located at your local exchange which will take messages when you are out or engaged on another call.
Settings menu BT Services By selecting the BT Services menu you can access a range of useful pre-stored numbers and further BT Calling Features. There are 2 empty memory locations so you can add 2 extra services of your choice and you can also delete or edit the pre-stored numbers and add further numbers of your choice. IMPORTANT Pre-stored BT services numbers: For more details on BT’s Calling Features, call BT free on 0800 800 150.
Edit a service 1. Press the 2. Press button. BT services is displayed, press . or to scroll to the service to edit and press . Edit Service is displayed, press . 3. Use the button to delete and the keypad to enter new characters for the name and press . 4. Use the button to delete and the keypad to enter new digits and press . Entry Saved is displayed. Delete a service 1. Press the 2. Press button. BT services is displayed, press . or to scroll to the service to delete and press .
Ringer tone There are 3 ringer tones to choose from. The default setting is Ringer tone 1. 1. Press the 2. Press button. BT services is displayed. to scroll to Ringer Tones and press . 3. Press or to change the ringer tone. On each press the level is shown on the display and you will hear an example ring. 4. When you hear and see the ringer tone you want, press to confirm. Set the display time and date The date will be shown on the display when in standby as dd/mm.
Display contrast There are 5 display contrast levels to choose from. The default setting is Level 3. 1. Press the 2. Press button. BT services is displayed. to scroll to Contrast and press 3. Press or to confirm. . to change the contrast level and press If you need some help, call us on 0800 145 6789† or go to bt.
General information Safety - Only use the telephone line cord supplied otherwise your telephone may not work. - Only use the recommended battery type (4 x AA batteries). - Never dispose of batteries in a fire. There is a serious risk of explosion and/or the release of highly toxic chemicals. - Do not open the handset or base of the telephone (except to replace the batteries). This could expose you to high voltages or other risks.
Guarantee Your BT Decor 2200 is guaranteed for a period of 12 months from the date of purchase. Subject to the terms listed below, the guarantee will provide for the repair of, or at BT’s or its agent’s discretion, the option to replace the BT Decor 2200 or any component thereof, which is identified as faulty or below standard, or as a result of inferior workmanship or materials. Products over 28 days old from the date of purchase may be replaced with a refurbished or repaired product.
Switchboard external line access code When connected to an internal switchboard, you may need to enter an access code e.g. 9 to get an outside line. So that the switchboard has time to pick up an outside line, you may also need to add a Pause after the access code. A Pause lasts 2.5 seconds. To insert a pause 1. When storing a number in the directory, press the button in the place you want a pause inserted. Recall The button is used when connected to certain switchboards e.g.
For a Better Future We’re always looking to make our products last longer and use less power, so we don’t have such a big impact on the environment. To find out about what we are doing, visit bt.com/betterfuture Offices worldwide The services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc’s respective standard conditions of contract.
