Operation Manual

5
If you need some help, call us on 0800 145 6789
†
or go to bt.com/producthelp
Battery low warning
When the batteries are low and in
need of replacing the display will
show the battery low icon .
Removing the batteries
If you ever need to remove the
batteries, firstly ensure that the
phone is disconnected from the
phone line and then turn the
phone over and remove the battery
compartment cover by pressing in
on the plastic clip and lifting the
cover off. Pull the ribbon to remove
the batteries.
IMPORTANT
Only use the telephone line cord
supplied otherwise your telephone
may not work.
Using broadband on the same
phone line?
To avoid problems with your
broadband or noise on your phone
line, you might need to plug it into
the wall socket via a microfilter
(not supplied).
If your main phone socket
has a single socket, as
shown, you’ll need to use
microfilters.
You don’t need to use
microfilters if your main
phone socket has two
separate sockets, like these:
Getting started
Location
You need to place your BT Decor 2200 within 3 metres of a
telephone line socket so that the cable will reach.
Activate the batteries
1. Activate the batteries by pulling the plastic tab away from the
underside of the phone.
Connect the telephone line
1. Plug the telephone line cord into the telephone wall socket.
Set the display time and date
See page 17 for instructions.
Yo ur BT D ec or 2 20 0 is n ow r e a dy f o r u se