Specifications

Figure 2-4 Base Coverage Area

term

Cordless DECT Document Revision 1

Repeater Guide 2 - 7

___________________________________________________________________________________

5.3 Test the Location

To test the location, plug the AC adapter into the repeater, then hold the

rep

eater in the place where you plan to mount it. The LED should remain on

and steady, indicating that the repeater has a good signal from the base.

If the LED flashes, the repeater is not getting a good signal. The repeater may

too far away from the base, there may be interference from electronic

devices, or the signal might be blocked by thick walls or metal objects. Try

moving the repeater to another location.