Operation Manual

37
• Press the LEFT/RIGHT buttons to set
the volume or tone required.
The ringer or tone is played for you.
• Press the
OK button to confirm.
Handset settings
The handset setting menu allows the
following settings to be changed.
Beeps You can switch advisory and
warning beeps on or off. Switching
them off will save battery energy but
may deprive you of information you
may need while using your
phone.
•
Button beep Each time you press
a button, the action is confirmed by a
beep. Default setting is ON.
•
Battery warning beep Tells you
when the battery needs charging.
Default setting is ON.
•
Range warning Tells you when
the handset is too far from the base
station. Default setting is OFF.
•
In-range beep Tells you the
handset has just logged on to a base
station. The handset will only log on
to a base station if it is within range
and is registered with it. Default
setting is OFF.
•
Confirmation beep Confirms that
you have followed procedures
correctly. Default setting is ON.
•
Error beep Lets you know that you
have made a mistake during a
procedure. Default setting is ON.
Auto Backlight The screen and
the buttons light up whenever a button
is pressed. This can be switched on
or off.