Operation Manual

46
To register your handset with more
than one base station
You can also follow these steps if
you want to register a handset to only
one base station but do not want it to
appear on the display as BASE 1.
...either at a Diverse 1010, 1015, 2010
or 2015 base station.
Press and hold down the green button
at the base station until you hear the
beeps (after about 10 seconds)
...or at a Diverse 2-line or Diverse ISDN
base station
Press the green LED button. The LED
flashes during the registration process.
...then, at the handset
• Press the
MENU button.
• Press the
DOWN button to highlight
SETTINGS
• Press the
OK button.
• Press the
DOWN button to highlight
REGISTER
• Press the
OK button.
• Press the
DOWN button to select the
base station you want to register with
(BASE1 to BASE 6).
• Press the
OK button.
• Enter the base station code
(default = 0000)
• Press the
OK button.
There is a short wait until the
available base station numbers
are displayed.
• Enter one of the free internal
extension numbers displayed on your
screen.
• Press the
OK button to confirm.
▼
RED
OK