Operation Manual

Diverse 3010 Micro – Edition 5 – 11 December ’00 - 3508
34
Note
The barred or enabled numbers must be
switched on before you can use this.
WARNING
You cannot dial 9 999 or R 999 from
behind a switchboard when call barring
is set.
Directory for barred/enabled
numbers
To: Bar numbers.
Enable handsets to call
only specified numbers.
Create a memory list.
Press the
INT button.
Press the
SET button.
Press the
0 button then press
the
1 button.
Press the
OK button.
Enter the base station PIN
(original setting
0000 ).
Press the
OK button. Display
shows the first location.
01 1
_
_
_
Empty or stored
number.
Memory location (1-5).
Function number
entered previously.
Call Restriction
INT
SET
OK
OK
0
1
KEYPAD
Press the UP/DOWN buttons
if necessary to scroll to the
location you want
1-5 .
Press the
OK button.
Enter the number you want to
bar, enable or change. Press
the
DELETE button to delete
digits.
Press the
OK button to
confirm.
Press the
RED PHONE button
to return to standby.
OK
OK
➜
To switch call barring/call
enabling on and off
Once you have set the
numbers you want, you can
then switch call barring/
enabling on or off at any time
(see below). You can do this
from any handset registered to
the base station.
Press the
INT button.
Press the
SET button.
INT
SET
SECURITY
Diverse 3010 Micro u/g 22/3/01 12:27 pm Page 34