Operation Manual

Diverse 3010 Micro – Edition 5 – 11 December ’00 - 3508
54
To insert an access code
This means the access code
will be automatically dialled
before any number stored in
the Caller Display calls list.
Press the
INT button.
Press the
SET button.
Press the
4 button then press
the
0 button.
Press the
OK button.
Enter the base station PIN
(original setting
0000 ).
Press the
OK button.
Enter the access code for your
switchboard (this can be up to
3 digits).
Press the
OK button to confirm.
Press the
RED PHONE button
to return to standby.
OK
OK
OK
INT
SET
4
GHI
0
KEYPAD
KEYPAD
To set the access pause
You can change the length
of an inserted pause before
the dial tone commences. The
standard setting is for a three
second pause.
Press the
INT button.
Press the
SET button.
Press the
4 button then press
the
1 button.
Press the
OK button.
Enter the base station PIN
(original setting
0000 ).
Press the
OK button.
Enter the length of pause
required by your switchboard:
1 for 1 second.
2 for 2 seconds.
3 for 3 seconds.
4 for 6 seconds.
Press the
OK button to confirm.
Press the
RED PHONE button
to return to standby.
OK
OK
OK
INT
SET
4
GHI
1
1
2
ABC
3
DEF
4
GHI
KEYPAD
KEYPAD
Note
•You can store RCL,
✱
, and
#
as well
as the digit keys 0-9.
•You may find it useful to enter 144
(for BT Chargecard access) as one of
the access codes, together with an access
pause of six seconds – see ‘To set the
access pause’ opposite.
SWITCHBOARD
Diverse 3010 Micro u/g 22/3/01 12:28 pm Page 54