Operation Manual

Diverse 4000 Classic ~10th Edition ~ 19th September ’01 ~ 4167
40
To set the dialling mode
You need only adjust this setting if
your switchboard does not operate
with the pre-set
tone dialling. You
can change the dial mode to pulse
dialling.
Press the
MENU options
button.
Press the
DOWN button
until the display shows
BASE SET .
Press the
OK button.
Press the
DOWN button
until display shows
ADD
FEATURES
.
Press the
OK button.
Display shows
DIAL MODE .
Press the
OK button.
Press the
DOWN button to
select:
TONE (with TBR)
PULSE (with Earth Recall)
DTMF-EARTH (tone with
Earth loop recall)
Press the
OK button to
confirm. The display shows
SAVED .
Press the
RED PHONE
button until you reach the
idle screen.
To set the recall time
You need only adjust this setting
if your switchboard requires a
different recall time to the pre-set
recall time of 100 MS.
Press the
MENU button.
Press the
DOWN button
until the display shows
BASE SET .
Press the
OK button.
Press the
DOWN button
until display shows
ADD
FEATURES
.
Press the
OK button.
Press the
DOWN button
until display shows
TBR .
Press the
OK button.
Press the
DOWN button to
select the flash time
80 ,
100 , 120 , 180 , 250 or 300ms .
Press the
OK button to
confirm. The display
shows
SAVED .
Press the
RED PHONE
button until you reach the
idle screen.
Please note
100 MS is the standard setting for
most UK switchboards.
MENU
OK
OK
OK
OK
MENU
OK
OK
OK
OK
GENERAL INFORMATION